How to Clean Hair Clippers: A Complete Guide to Safe and Effective Maintenance
Knowing how to clean hair clippers is key to keeping them sharp and safe. The best method is C‑D‑O. First, clean out all the hair. Then disinfect with 70% isopropyl alcohol.
Finally, oil the blades lightly. This stops bacteria buildup and helps the blades run cool and smooth without pulling hair.
Start by brushing out all loose hair from the blades and housing. Spray alcohol on the blades until they look wet. Let the alcohol sit for about a minute.
This kills germs on the blades. This kills germs and prevents infections, especially if you share clippers.
After disinfecting, add a few drops of clipper oil along the blade edges. The oil reduces friction and prevents overheating during use. Regular cleaning like this avoids most common clipper problems without needing repairs.
Key Takeaways
- Brush loose hair off blades before cleaning each time you use clippers.
- Use 70% isopropyl alcohol to disinfect blades with at least a one-minute wet time.
- Apply a few drops of clipper oil after cleaning to prevent overheating.
- Soak blades 10 minutes in Barbicide for a deeper clean when sharing clippers.
- Air dry clipper blades on a clean rack for 60 to 90 minutes after cleaning.
- Replace worn blades that pull hair or cut unevenly to maintain good performance.
How to Clean Hair Clippers Properly at Home

Cleaning your hair clippers right keeps them sharp and safe. First, unplug the clippers for safety and better control while you clean. You’ll need a small brush, clipper oil, and a cloth.
Use 70% isopropyl alcohol or disinfectant spray for cleaning. These simple items keep your clippers in good shape.
Follow these steps every time you clean your clippers, especially after each use. This routine removes hair buildup and kills bacteria on blades.
It also lubricates the blades to keep them smooth. Well-lubricated blades cut hair better and last longer.
- Unplug the clippers to avoid accidents or damage during cleaning.
- Remove clipper guards so you can clean both the guards and blades properly.
- Brush away loose hair by tilting the clippers downward and sweeping away from the blade opening.
- Disinfect the blades with a spray or wipe soaked in 70% isopropyl alcohol. Let it sit for about one minute to kill germs.
- Use a blade wash solution and brush for deeper cleaning. Soak the blade briefly if it’s very dirty. But don’t soak the entire clipper unless it’s fully waterproof.
- Dry the blades completely before oiling. Use a soft cloth or give it a few minutes of air drying.
- Apply a few drops of clipper oil along the blade’s teeth and edges. Run the clippers for a few seconds to spread the oil evenly.
- Reattach guards and plug in the clippers. You’re ready for your next haircut.
Good clipper cleaning takes about five minutes and keeps your blades cutting smoothly. Avoid skipping oiling; unlubricated blades heat up and pull hair instead of cutting. Regular cleaning also helps clippers last longer without repairs.
Tools and Products Needed for Cleaning Hair Clippers

To clean hair clippers properly, you need the right brushes, disinfectants, and oils. Use a stiff brush and microfiber cloth to remove hair and debris.
For disinfecting, choose between 70% isopropyl alcohol, Barbicide, or specialized clipper sprays. Lubricate blades with clipper oil to keep them running smoothly.
Cleaning Brushes and Cloths
A stiff brush works best for removing hair between the blades. The small brush that comes with clippers helps but an old toothbrush does a better job. Use microfiber cloths or paper towels for wiping down the blades and clippers after brushing.
The brush removes fine hair that can jam your clipper’s motor. Regular brushing prevents overheating and uneven cuts. Cloths pick up oils and sweat, which helps keep your clippers clean longer.
Disinfectants: Alcohol, Barbicide, Sprays
Isopropyl alcohol (70% or higher) is the most common disinfectant for clipper blades. It cleans off product buildup and kills germs on nonporous surfaces like blades. For deeper cleaning, soak clipper blades in Barbicide for 10 minutes.
Follow the label instructions carefully when using it. This is important if you share clippers with others.
Clipper cleaning sprays are also an option but check the ingredients for safety. Avoid household bleach or Lysol on blades.
They can damage the metal and ruin the clipper. Use water only if your clipper’s blades are specifically labeled as washable.
| Disinfectant | Use | How to Apply | Cost Range |
|---|---|---|---|
| Isopropyl Alcohol (70%+) | Daily cleaning and disinfection | Wipe blades with cloth soaked in alcohol | $3 – $10 per bottle |
| Barbicide Solution | Deep disinfection; shared clippers | Soak blades for 10 minutes | $10 – $20 per quart |
| Clipper Cleaning Sprays | Quick cleaning and light disinfection | Spray directly on blades, wipe | $5 – $15 per can |
| Water | For washable detachable blades only | Rinse blades carefully, dry immediately | Free |
| Household Bleach or Lysol | Not recommended | Can damage blades, avoid use | Varies |
This table shows your options for disinfectants and how to use them safely. Choose products suited for your clipper model and usage habits. Proper disinfection prevents infections and prolongs blade life.
Always follow product instructions exactly when disinfecting clipper blades.
Lubricants for Blades
Use clipper oil designed specifically for hair clippers to lubricate blades. A few drops on the blade teeth before and after use reduce friction and heat build-up. Most clippers come with a small oil bottle and recommendations on when to apply it.
Regular oiling prevents hair pulling and keeps blades sharp longer. Do not use oils like WD-40 or cooking oils on clippers. They can clog or damage your clippers quickly.
Stick to oils made for hair clippers instead. Oiling every few uses keeps your clippers running smoothly for years.
How to Clean Hair Clippers Without Removing the Blades
You can clean hair clippers without removing the blades safely and effectively. This quick method works well for daily maintenance and saves time. You focus on brushing, disinfecting, and oiling while the blades stay in place.
Brush Away Loose Hair with the Clipper Off
Start by powering off your clippers to avoid any accidents. Use a stiff brush to remove loose hairs from the blades. Brush the clipper housing gently to get rid of hair there too.
Make sure no hair is left stuck before the next step. This step helps prevent hair buildup that can clog the blades or cause rust.
Brush carefully between the teeth of the blades and around the edges where hair collects. Avoid cotton balls or Q-Tips here, or you risk pushing fibers into small crevices. Getting rid of visible hair first sets the stage for better disinfection.
Spray or Wipe Disinfectant on Blades
Next, apply a disinfectant designed for clippers, like Andis Cool Care or 70%+ isopropyl alcohol. Spray from a few inches away or wipe on with a clean cloth or lint-free towel. Make sure the blades get wet and stay damp for about one minute to kill germs.
Follow the product’s label for exact contact time to ensure proper sanitizing. Avoid saturating the clipper housing to prevent damage to electrical parts. This step controls bacteria and fungi that cause scalp irritation or infections.
Run the Clipper Briefly to Remove Buildup
Turn the clippers on after spraying disinfectant. Let the blades run for 5 to 10 seconds. This helps the spray spread and clean all surfaces.
This loosens stubborn hair clippings or debris stuck between the blades. The slight vibration helps shake out particles without blade removal.
Turn the clipper off and wipe away excess moisture and loosened hair with a clean cloth. This keeps blades clear and ready for the next cut. You prevent jams and dulling that happen when buildup stays longer.
Oil Blades Lightly Without Disassembly
Apply a drop of clipper oil on top of the blade teeth with the clipper off. Use just enough oil to coat the surfaces gently without drips. This reduces friction, stops rust, and keeps blades sharp.
Switch the clippers on briefly to spread the oil evenly across the blades. Wipe off any extra oil left outside the blade area. Regular oiling after each cleaning extends blade life and improves cutting performance.
Follow these exact steps for quick clipper cleaning:
- Turn off the clippers and unplug them if cordless.
- Brush loose hair away from blade teeth and clipper housing.
- Spray or wipe blades with a clipper-safe disinfectant.
- Wait about one minute to let disinfectant work.
- Run clippers for 5 to 10 seconds to loosen debris.
- Turn off clippers and wipe away excess spray and hair.
- Put a drop of clipper oil on blade teeth.
- Run clippers a few seconds to spread oil, then wipe off excess.
How to Remove, Clean, and Disinfect Clipper Blades Safely
Removing clipper blades lets you clean them deeply and disinfect well. Do this gently to avoid dulling or bending the blades. A steady hand and a proper workspace are key for safety and good results.
Unplug and Prepare Your Workspace
Always unplug your clipper before starting blade removal. This prevents accidental cuts or electric shocks. Clear a flat, well-lit surface to work on and lay a towel to catch small parts.
Gather your tools nearby, such as a screwdriver and cleaning brushes. Have a bowl ready for soaking blades safely. Good prep speeds up the process and reduces errors.
Remove Blades Carefully Using Tools
Use the right screwdriver for your clipper screws to avoid stripping them. Hold the clipper steady and loosen screws slowly. Remove screws completely to separate the blade unit without forcing it.
Lift the blades straight off to keep them aligned and avoid bending. Keep screws in a small container so they don’t get lost. Avoid touching blade edges directly to prevent cuts and keep blades sharp.
- Unplug the clipper and set it on a towel.
- Identify and remove screws holding the blades.
- Carefully lift the blades straight away from the clipper.
- Set blades and screws aside on a clean surface.
Clean Blades with Brush and Soap or Blade Wash
Rinse blades under warm water and apply mild soap or specialized blade wash. Use a small brush to clean between blade teeth and edges. This clears hair, oil, and dirt for a thorough clean.
Don’t soak blades in soapy water long; just enough to loosen debris. For running blade wash, some brands recommend soaking briefly while rotating. After, rinse blades to remove all soap bubbles.
Disinfect Blades in Alcohol or Barbicide Soak
Submerge blades fully in 70% isopropyl alcohol or Barbicide solution for exactly 10 minutes. This kills germs and helps prevent infections. Avoid prolonged soaking to protect blade metal from corrosion.
Change the disinfecting liquid if cloudy and always wipe blades clean after soaking. Remember, disinfection doesn’t sterilize, so clean more often if you share clippers. Never skip drying after this step.
Dry and Oil Blades Before Reassembly
Pat dry blades with a clean cloth and let air dry completely before oiling. Drying prevents rust and prepares blades for lubrication. Use clipper-specific oil like Wahl Blade Oil sparingly on all edges.
Put a few drops of oil on teeth and moving parts. Gently run the powered blades to spread the oil evenly.
This keeps blades sharp and smooth. Reattach blades carefully, securing screws firmly but without overtightening.
How to Oil and Maintain Hair Clipper Blades for Longevity
Hair clipper oil keeps blades sharp and prevents them from rusting. Without oil, blades can drag or pull hair even after cleaning. You should oil blades every time you clean them to stop wear and overheating.
After cleaning and disinfecting, hold the clipper angled down. Add 2-3 drops of oil along the blade’s top edge.
One drop goes at each corner and one in the center. Turn on the clipper to spread the oil evenly and cool the metal.
Use only a few drops. Using too much oil can attract dust and make your clipper messy. Good clipper oil usually costs between $5 and $10 per bottle.
A little oil goes a long way, so bottles last for months. Use it sparingly to stretch the supply. Avoid household oils; they can gum up or damage blades.
Oiling reduces friction and heat buildup inside the clipper motor. This protects blades from dulling quickly or warping.
For heavy use, oil blades daily or after each client. For home use, every few uses or after cleaning is enough.
Always turn on your clipper before oiling blades. It helps spread oil and cools them down.
Keep clipper blades smooth by oiling after cleaning, especially if you notice resistance or heat. Blades should glide easily over your skin without pulling or noise. Regular oiling extends blade life and keeps your haircuts clean and quick.
Cleaning Clipper Attachments and Comb Guides
Plastic clipper attachments and comb guides trap hair, oils, and product buildup. Cleaning them well stops germs and keeps your tools fresh and safe. Warm soapy water works well to remove sticky or greasy residue from these plastic parts.
Disinfecting attachments ensures you don’t pass germs if you share clippers. Use sprays made for clippers, or alcohol-based solutions.
But watch the label because some alcohol can harm glue or rubber in certain guards. Letting guards dry fully after washing helps avoid rust or damage when you store them.
Follow these steps to wash and disinfect your clipper attachments properly. This takes about 10 to 15 minutes.
You only spend a few dollars. Soap and disinfectant spray are assumed already on hand.
- Remove the clipper guards and comb guides carefully from your clippers.
- Fill a bowl with warm water near 100°F (38°C). Add a few drops of mild dish soap.
- Soak the attachments in soapy water for five to ten minutes. This loosens dirt and oils.
- Use a soft brush or old toothbrush. Scrub hair and build-up gently on all surfaces.
- Rinse attachments under warm running water to wash off all soap and debris.
- Spray the plastic attachments with clipper disinfectant. Or carefully use 70% isopropyl alcohol.
- Let the attachments air dry fully on a clean towel. Do not store damp guards in a closed container.
- Keep dry attachments in a clean, dry place. Avoid direct sunlight to prevent warping.
Attachments feel greasy or sticky after cleaning? Soak and scrub them again.
Avoid harsh chemicals that could break down plastic. Drying well keeps your comb guides from smelling musty and stops grime growth between uses.
Cleaning Routines by Clipper Type and Usage Frequency
Cleaning hair clippers depends on how often you use them and the type of clipper. Home users who cut hair weekly should clean clippers after every use. Professionals or barbers need daily cleaning with disinfectant to meet hygiene rules.
Cordless clippers need special care to avoid accidental starts during cleaning. Always switch them off first.
Some clippers are washable and can be rinsed under running water. If your clipper has an IPX6 or IPX7 rating, you can safely rinse the blade head without worries.
But most regular clippers should never be washed with water. Instead, use a brush and cleaning spray made for clippers to avoid rust or motor damage.
| Clipper Type | Usage Frequency | Recommended Cleaning Schedule | Method |
|---|---|---|---|
| Home Use Corded or Cordless | 1, 2 times/week | Clean and oil after every use | Brush hair off, apply oil, disinfect blade |
| Professional Barber Clippers | Daily or multiple times/day | Clean, disinfect, and oil after each client | Use approved clipper disinfectant spray and oil |
| Waterproof/Washable Clippers | Any | Rinse blade under water, dry, oil after use | Use warm water below 104°F and clipper oil |
| Cordless Clippers | Any | Turn off, clean after every use, oil regularly | Avoid running water on motor, use spray, oil blade |
Daily cleaning takes just a few minutes but protects your clippers and clients. Oil keeps blades sharp and motor working long.
Using clipper spray disinfectants is safer and more effective than alcohol. These sprays clean, cool, and lightly lubricate blades at once.
Too little cleaning leads to dull blades and clogs hair inside the clipper. Water on non-washable parts causes rust and burns out the clipper motor.
Following these guidelines extends clipper life to over ten years for home users. Barbers can keep their tools sharp and safe near a decade with strict routines.
Common Cleaning Mistakes and How to Avoid Them
One common mistake is not drying clipper blades fully after cleaning. Moisture trapped inside can cause rust or corrosion within days. Always wipe blades with a microfiber cloth before oiling.
Wait at least 10 minutes after wiping. Then you can oil or store them.
Using household oils or WD-40 instead of clipper oil also damages blades. These oils are thicker and can gum up the clipper mechanism. Use oils made for hair clippers only.
They keep blades sharp and smooth. These oils don’t slow down motor speed.
Another issue is cleaning clippers with wet hair still in the blades. Wet hair clumps and doesn’t cut evenly, which dulls the blades. Most manufacturers recommend clipping dry hair for cleaner cuts and to reduce rust risk.
Applying disinfectant while blades are wet is a frequent error that harms metal parts. Always unplug clippers first, fully dry the blades, then apply disinfectant sparingly. Let blades air dry completely before the next use or oiling session.
Leaving dead hair and product residue on blades causes skin irritation and clipper pulling. Use a small brush to clear hairs and stickiness after each use. Regular cleaning stops buildup that can irritate skin or cause infections.
Storing clippers in a humid bathroom or without a cover lets dust and moisture settle inside. Keep clippers in a dry, covered space after use. This prevents corrosion and keeps blades ready for the next cut.
Never oil your clippers before the blades are completely dry to avoid rust and damage.
Step-by-Step Action Plan for Cleaning Your Hair Clippers
Follow these simple steps to keep your hair clippers sharp and sanitary. You will notice smoother cuts and longer blade life.
- Before First Use: Clean the blades with a brush and apply oil to new clippers. They should look shiny and feel smooth when running.
- After Every Use: Remove loose hair using a small brush while the clipper is unplugged. Your clippers will stay free of buildup and won’t clog.
- Weekly: Detach the blades carefully. Soak in rubbing alcohol for 10 minutes, then dry thoroughly. The blades will be disinfected with no rust spots.
- Weekly: Oil the blades with clipper oil after drying. Run the clipper briefly to spread oil evenly. This keeps blades sharp and quiet.
- Monthly: Clean clipper attachments and comb guides in warm soapy water. Dry completely to avoid bacterial growth.
- Every 2-3 Months: Check screws to ensure blades are secure but still move slightly for cutting. Proper tension improves performance.
- Quarterly: Perform a full deep clean including motor vents to remove hair dust. Your clipper will run cooler and last longer.
- As Needed: Replace dull blades or worn-out parts promptly to avoid poor cuts or pulling hair.
Frequently Asked Questions
How Do I Disinfect My Hair Clippers?
Use 70% isopropyl alcohol to disinfect clipper blades. Spray or wipe the surface well.
Keep it wet for one minute. Then dry it.
What Do Hairdressers Use to Clean Clippers?
Hairdressers often use blade wash solutions and small brushes to clean clippers. They may soak parts if extremely dirty, improving cleanliness and blade performance.
How Do Barbers Disinfect Their Clippers?
Barbers use alcohol-based sprays to disinfect clippers between clients. They follow with light oiling to keep blades running smoothly and prevent rust.
Can You Disinfect Clippers with Lysol?
Lysol can disinfect clippers if it fully contacts the blade surface for the required time. Always check the label and avoid harsh chemicals that might damage blades.
How Often Should I Oil My Hair Clipper Blades?
Oil clipper blades after every few uses or when they feel dry. Light oil keeps blades cool, reduces friction, and extends their life.
Can I Use Water to Clean My Clipper Blades?
Yes, if your clippers have detachable, washable blades. Remove the blades and rinse them under water, then dry completely before reassembling.
Final Thoughts
Keeping your clippers clean and oiled makes your grooming easier. Start by brushing off hair after your next haircut. That small step already improves clipper life and performance.
