How to Use Dyson Supersonic: A Complete Guide for Perfect Styling
Knowing how to use Dyson Supersonic right makes a big difference. Start by plugging in and switching the dryer on with its power button. Attach your preferred tool depending on your hair type or style goal.
Begin drying with a medium heat and speed to avoid overheating your hair. Use the Gentle Air Attachment for rough drying until your hair is about 80 percent dry. This approach protects your scalp and gets you off to a good start.
Remember, the cold blast button locks in your style by quickly cooling hair. Also, choosing the right heat helps prevent damage and keeps hair looking sleek. Your Dyson Supersonic is designed to make styling faster and healthier for your hair.
Key Takeaways
- Attach the appropriate tool before turning on your Dyson Supersonic.
- Start with medium heat and speed for safe, effective drying.
- Rough-dry hair to roughly 80 percent dryness before styling.
- Use the Gentle Air Attachment for sensitive scalps or fine hair.
- Press the cold blast to lock your style instantly.
- Select heat levels based on your hair’s thickness and texture.
How to Start Using Your Dyson Supersonic Hair Dryer

Your Dyson Supersonic hair dryer arrives ready to use. You only need a few quick steps before it’s working. This setup ensures you get the best airflow and temperature control from the start.
First, look inside the box for the dryer and its magnetic attachments. Attachments like the smoothing nozzle or diffuser snap on easily. This process takes seconds but helps tailor the drying experience for your hair.
Before plugging in, check your power outlet for compatibility. The Supersonic runs on 1600 watts, needing a standard US voltage plug. Powering on without any settings pre-chosen lets you decide your drying speed and heat.
- Unbox the Dyson Supersonic and lay out the parts on a clean surface.
- Choose the attachment you want based on your styling goal or hair type.
- Align the magnetic ring on the attachment with the dryer’s air outlet.
- Press the attachment gently until it clicks into place securely.
- Plug the power cord into a standard electrical outlet.
- Locate the power button on the handle near your thumb.
- Press the power button once to turn the dryer on and start airflow.
- Adjust heat and speed controls after powering on, if desired.
Do not force attachments into the hair dryer. They should click smoothly.
If the dryer doesn’t turn on, check the outlet or the power cord for damage. A flashing LED might mean the dryer automatically shut off to protect the motor.
The setup takes under two minutes. Getting this right means your Supersonic delivers precise airflow every time you style.
Using it straight from the box without adding attachments is also possible. But adding them gives better control.
Choosing and Using Dyson Supersonic Attachments Correctly

You get five main attachments with the Dyson Supersonic. Each one fits a hair type or style goal. Pick the right one for your needs.
Each attachment serves a clear purpose from smoothing to curl definition. Most attachments are interchangeable across Dyson Supersonic models as they use magnetic connectors.
The Smoothing Nozzle for Sleek Finishes
The styling concentrator nozzle offers precise airflow for a sleek, smooth finish. It directs air exactly where you want to style without disturbing the rest of your hair. Use low to medium heat for fine or damaged hair.
Set the speed to medium. This prevents extra damage to your hair.
This nozzle is handy for creating polished blowouts on thick or straight hair. Point the nozzle downward along hair strands while drying for a shiny, frizz-free look. You can switch it quickly with the magnet mount for faster styling.
Diffuser for Curls and Waves
The Wave+Curl diffuser spreads airflow to reduce frizz and define curls or waves. It suits curly, coily, or wavy hair aiming for volume and texture. Use low heat and low speed to keep curls intact and reduce drying time.
This attachment lifts hair at the roots and distributes heat gently. Place the diffuser close but not touching your scalp, scrunching your curls as you dry. It helps preserve natural curl patterns while adding bounce.
Wide-Tooth Comb for Curly and Coily Hair
The wide-tooth comb attachment is designed to detangle and elongate curly or coily hair while drying. It gently shapes hair without breaking curls or creating frizz. Pair it with low heat and low speed to protect fragile hair strands.
Run the comb through damp hair slowly with the dryer on. This method reduces knots and stretches curls for a softer, smoother look. It’s ideal if you want more defined length and less shrinkage from your natural curls.
Flyaway Attachment for Frizz Control
The flyaway attachment uses the Coanda effect to smooth frizz and flyaways. It’s great for fine, damaged, or straight hair needing a sleek finish. Attach it to focus airflow on stubborn stray hairs for a polished result.
Use low heat and medium speed with this tool. Hold it close to the hair surface and move slowly for gentle control. It tames static and flyaways without flattening volume.
| Hair Type | Heat Setting | Speed Setting | Styling Goal/Benefit |
|---|---|---|---|
| Fine Hair | Level 1 or 2 (Low to Medium) | Level 2 (Medium) | Maximizes volume, minimizes damage, gentle drying |
| Thick Hair | Level 2 or 3 (Medium to High) | Level 3 (High) | Fast, efficient drying, smooth blowout |
| Damaged Hair | Level 1 (Low) | Level 1 (Low) | Prioritize preservation, prevent further damage |
| Curly/Coily Hair | Low | Low | Defined curls, reduced frizz, improve natural pattern |
Matching the right attachment with your hair type and heat setting is key. Using higher heat or speed than recommended can cause frizz or damage. For example, curly hair dries best on low heat with the diffuser or wide-tooth comb.
The flyaway tool helps control static on fine hair. Use it at medium speed. It keeps your hair soft and voluminous.
Attachments snap on and off fast with magnets, letting you switch styling tools within seconds. This flexibility suits complex styles or quick fixes.
Always start with low heat and speed on new attachments. This prevents damage and unwanted frizz. Adjust settings only after seeing results.
Selecting Heat and Speed Settings for Your Hair Type
The Dyson Supersonic has 3 airflow speeds and 4 heat settings. You can change these while drying to fit your hair’s needs. A cold shot button lets you lock your style with a cool blast.
For fine or damaged hair, low heat and low speed work best. This gentle airflow prevents extra damage and keeps hair smooth. Thick or textured hair dries faster using medium or high heat and airspeed.
| Feature | Details |
|---|---|
| Number of speeds | 3 airflow speeds |
| Number of heat levels | 4 heat settings (including a cold shot) |
| Airflow rate | 41 liters per second |
| Temperature adjustability | Yes, intelligent heat control |
| Ionic function | Yes, reduces static |
| Attachment learning | Recognizes last-used setting with attachments |
| Cool shot | Locks hair style with cold airflow |
Curly hair needs low heat and low speed to diffuse properly. This method improve curls without causing frizz. For straight styles on thick hair, raise heat to medium or high for a faster dry.
To adjust settings, press the speed button to cycle through low, medium, and high airflow. Tap the heat button to choose from the four heat levels. Use the cold shot button to end and set your style with cool air.
Step-by-Step Drying and Styling Techniques for Best Results
Dry your hair until it is about 80 percent dry using the Dyson Supersonic. Use the right attachments and heat settings for your hair type. Finish styling by locking in the shape with the cold shot button for lasting results.
Starting with Towel-Dried Hair
Begin drying with towel-dried hair to remove excess water but keep it damp. This step cuts drying time and stops your hair from feeling too hot fast. Gently press your hair with a towel instead of rubbing to avoid creating frizz or damage.
For fine hair, pat slowly to keep strands smooth. Textured or curly hair benefits from leaving more moisture in before drying. This keeps natural waves or curls from getting frizzy.
Rough Drying Without Attachments
Use the Dyson Supersonic without attachments or with the Gentle Air attachment first. Set heat to medium or low and speed to high to dry hair quickly but gently. Stop rough drying when your hair reaches about 80 percent dry.
This step works on all hair types. But make slower progress on fine or thin hair.
Coarser hair can take a bit longer and handle slightly higher heat. Rough drying readies hair for the precision styling phase.
- Attach no attachment or Gentle Air attachment to the dryer.
- Set heat to medium or low and speed to high.
- Starting at roots, move the dryer all over your hair.
- Keep the dryer moving constantly to avoid heat spots.
- Stop rough drying when your hair is about 80% dry.
Precision Drying with Attachments
Use the smoothing nozzle or styling concentrator for shaping hair in sections. Work on one section at a time to control volume and texture better. Adjust heat to a lower temperature to protect hair while styling.
Wrap your hair around a round brush for volume or smoothness. Aim the airflow from the attachment along your hair strands. This helps style your hair better.
This directs heat efficiently without causing frizz. For wavy or curly hair, use the diffuser attachment to improve natural texture.
- Choose the appropriate attachment for your desired style.
- Separate hair into sections using clips.
- Set heat to low or medium and speed to low or medium.
- Style each section using the attachment and brush if needed.
- Move the dryer along the hair slowly to set the shape.
Locking Styles with the Cold Shot
Press and hold the cold shot button on each styled section for 5 to 10 seconds. This cool blast locks in the style and adds shine. Finish by running your fingers lightly through your hair to blend everything gently and reduce flyaways.
The cold shot is especially helpful for fine or straight hair. It holds curls and waves in place longer on thicker or curly hair. Use it after every section for consistent results across your whole head.
Protecting Your Hair and Scalp from Heat Damage
The Dyson Supersonic uses Nural™ sensors to keep hair and scalp safe. It adjusts heat and airflow to maintain 55°C near the scalp. This temperature is warm enough to dry hair efficiently without causing heat damage or discomfort.
Scalp Protect mode works by reducing heat and diffusing airflow. It lets you dry hair close to the scalp to build volume. This works well for delicate or fine hair.
Too much heat can cause dryness. It may also irritate sensitive scalps.
For best scalp health, use the Gentle air attachment with Scalp Protect mode. This attachment softens airflow, protecting your scalp while drying. It helps keep your scalp hydrated.
Hydration reduces dryness and itching. This works for all scalp types. You can safely use this setup daily, even if your scalp is sensitive or oily.
To lower heat damage, follow these tips. Don’t hold the dryer in one spot too long. Move it around gently.
Move the dryer steadily all around your hair. Let the dryer cool down between uses to protect its sensors and your scalp.
Drying hair at 55°C with diffused airflow helps prevent heat burn and scalp dryness.
Try starting with Scalp Protect mode activated, then adjust if needed. You can raise airflow speed with thick or coarse hair.
Stay on safe heat settings to protect strands. For fine or fragile hair, always stay on low or medium speed with gentle air.
Dyson Supersonic costs more because of its advanced technology. It fits people wanting top hair and scalp care.
You’ll spend less time on damage repair because your hair stays healthier. Sensitive scalps benefit the most from avoiding harsh heat that causes redness or flaking.
Maintaining and Cleaning Your Dyson Supersonic Hair Dryer
Keep your Dyson Supersonic working well by cleaning its filter regularly and storing it correctly. Watch for reduced airflow or yellow flashing lights as signals to clean the filter. Proper care helps avoid overheating and keeps the air moving smoothly.
Removing and Cleaning the Filter
Cleaning the filter stops dust and hair from blocking airflow through your dryer. Dyson’s Supersonic has a removable filter cage at the bottom of the handle. The dryer will flash a yellow LED light when it’s time to clean the filter.
Follow these steps to clean the filter safely:
- Unplug your Dyson Supersonic and let it cool down fully.
- Turn the bottom filter cage counterclockwise to unlock it, then pull it off.
- Use a soft brush to remove dust or hair stuck on the filter mesh.
- Rinse the filter cage under lukewarm water to clear residue.
- Let the filter dry completely before reattaching it to the dryer.
- Align the filter cage back onto the handle and twist clockwise to lock.
- Plug the dryer back in and check if the yellow light has gone off.
Cleaning this filter takes about 5 to 10 minutes. Avoid using harsh chemicals or abrasive tools to prevent damage.
Checking for Blockages and Debris
Check your dryer monthly for blockages or sticky hair product buildup. These affect airflow and cause the dryer to overheat or slow down. Check the intake and outlet vents carefully for any debris.
Use your fingers or a soft brush to clean gently. Avoid harsh tools to keep parts safe.
Sticky residues from hair products can limit air movement. Wipe the outside vents with a damp cloth. Avoid water inside the motor housing to protect the electrical parts.
Storing the Dryer Safely
Store your Dyson Supersonic in a dry, dust-free place to protect the motor and components. Avoid wrapping the cord tightly around the dryer. This can damage the wire or connectors.
Use the original storage pouch or a soft case if possible. Place the dryer upright on a flat surface when not in use. You can also hang it by the cord loop.
This helps avoid stress on the parts. Keep it away from direct sunlight, heat sources, or damp spots.
Resetting the Dryer If It Malfunctions
Seeing three red LED lights flashing means the dryer may have overheated. It could also signal another issue inside the device. Watch the lights closely.
Turn off and unplug the dryer immediately. Let it cool for at least 30 minutes in an open, well-ventilated spot.
After cooling, check and clean the filter and vents again. Plug it back in. Keep watching the lights if they keep flashing.
Contact Dyson support or a licensed technician for help. Do not attempt to open or repair the dryer yourself, as this risks injury or damage.
Common Mistakes to Avoid When Using the Dyson Supersonic
Using the Dyson Supersonic incorrectly can hurt your hair and mess up your style. One common mistake is using high heat on wet hair. This heats hair too fast, causing damage and frizz.
Use medium or low heat until your hair is mostly dry. Aim for about 80% dryness first. Then switch to higher heat to style your hair.
Another error is holding the dryer too close to hair. The Supersonic airflow is powerful and a close distance can cause uneven drying or scalp discomfort.
Keep the dryer at least 6 inches from your head. Move it around smoothly rather than focusing on one spot.
- Attach magnetic accessories firmly before use to avoid them dropping.
- Match heat and speed settings to your hair type for best results.
- Don’t block the air intake or the filter vents during drying.
- Avoid using the highest speed constantly; switch to low for detailing.
- Clean the filter regularly to maintain airflow and prevent overheating.
- Use the cool shot button at the end of styling to set your look.
Many people forget to turn off the cool shot button. This wastes battery or power quickly. It also makes your styling take longer than needed.
The cool shot button keeps blowing cold air until pressed again. Press it only when you want to lock your style. Also, avoid drying with wet or damp hair at maximum heat.
Some users skip reading the manual and miss how to properly fit attachments. Attachments can fall off if you don’t secure them properly.
Make sure attachments click magnetically into place before switching on. This saves frustration and keeps styling smooth.
Not adjusting settings for your hair length or thickness can lead to under- or over-drying. Fine hair usually does better with lower heat and speed.
Thick hair may require higher settings. Test with small sections to find what works.
Skipping regular cleaning can block the filter and reduce airflow. This makes the dryer work harder, which can shorten its lifespan. Wipe your Supersonic with a dry cloth regularly.
Check for lint every few uses. This keeps it working well longer.
Styling Variations for Different Hair Types Using Dyson Supersonic
Your hair texture affects how you dry and style your hair. Fine hair needs gentle drying with low heat to avoid damage. Thick hair requires more heat and time to dry completely without leaving damp spots.
Curly and coily hair do well with the Diffuse mode. It helps keep curls defined. It also reduces frizz.
This mode uses airflow to gently dry curls, preserving their natural shape and boosting volume. Choose the right attachment and settings for your hair texture to get the best result.
For fine hair, the goal is often to add volume without flattening strands. Use the Pixie Diffusing attachment to lift roots and create lasting curls. The Hover Diffusing attachment works great for thick, curly hair.
It smooths curls and cuts frizz. It keeps moisture balanced.
| Feature | Pixie Diffusing | Hover Diffusing |
|---|---|---|
| Purpose | Creates significant root volume and curl definition | Gently dries hair, reduces frizz, preserves natural texture |
| Result | Voluminous, well-defined curls with noticeable lift | Smooth, shiny, well-formed curls with minimal frizz |
| Best For | Users seeking maximum volume and tight curl clumps | Users prone to frizz or delicate curl patterns |
Start with towel-dried hair for all textures. For fine hair, set the dryer on low heat and use the Pixie Diffusing attachment. Hold the diffuser close to your scalp and cup sections of hair, focusing on roots.
For curls, keep the Hover Diffusing attachment at medium heat to avoid heat stress. Hold the diffuser close to your hair. Gently scrunch your curls.
Dry each section for about 2 to 3 minutes. Thick hair needs slow, steady drying to avoid a crunchy feeling.
Using too high heat on fine hair can cause breakage. Always start with lower heat and increase only if needed.
To improve volume, lift hair at the roots while drying in short bursts. Use the smoothing nozzle for sleek styles. Run the dryer down hair from root to tip.
This smooths the strands. Adjust heat to medium for thick hair and low for fine hair to prevent overheating.
Mastering these variations takes practice, but you’ll notice less frizz and better hold. Change attachments and settings to fit your hair type. This speeds up styling.
It helps keep your hair healthy. Your hair’s unique traits affect your style’s finish.
Match the technique to your hair. This creates smooth shine or tight curls.
Step-by-Step Action Plan to Master Your Dyson Supersonic
Follow these steps to start using your Dyson Supersonic hair dryer confidently and effectively.
- Before you begin: Unbox your Dyson Supersonic and attach the smoothing nozzle. Plug it in and switch it on to check if it powers up smoothly.
- Day 1: Use the medium heat and speed setting on damp hair. Dry one section until it’s about 80% dry. Your hair should feel warm, not hot.
- Day 2: Experiment with the styling concentrator attachment. Try drying roots first to lift hair. You’ll notice more volume in your style.
- Day 3: Test the diffuser on curly or wavy hair. Keep the speed low and heat moderate. Your curls should look more defined without frizz.
- Week 1: Add the cool shot button to set your style. Use it at the end of drying for 1 to 2 minutes. Your hair should feel cooler and hold the shape better.
- Week 2: Clean the filter and check for hair buildup. A clean filter means strong airflow and prevents overheating.
- After 3 weeks: Evaluate your usual settings and attachments. Adjust speed and heat to match your hair’s daily needs for better care and style.
Frequently Asked Questions
How Do I Attach and Remove Dyson Supersonic Accessories Correctly?
To attach accessories, align and gently push them onto the dryer’s nozzle until they click. To remove, hold the dryer and carefully pull the accessory off without twisting. This keeps the magnetic connectors safe and the attachments secure during use.
Can I Use the Dyson Supersonic Hair Dryer on Wet Hair Directly After Showering?
It’s best to towel-dry your hair first before using the Dyson Supersonic. Damp hair allows the dryer to work faster and reduces heat exposure. Using it on soaking wet hair can take longer and increase heat damage risk.
What Does It Mean When My Dyson Supersonic Shows Flashing White-Blue LEDs?
Flashing white-blue LEDs on the Dyson Supersonic usually indicate an error or overheating. Turn the dryer off and unplug it. Let the device cool down fully before using it again.
Check the user manual for specific troubleshooting steps. Follow those steps if needed.
Is the Dyson Supersonic Suitable for All Hair Textures and Types?
Yes, this dryer fits all hair types. It offers adjustable heat and speed settings. Plus, specialized attachments tailor drying and styling to curly, straight, thick, or fine hair efficiently.
Can I Use Third-Party Attachments with My Dyson Supersonic?
Using non-Dyson attachments isn’t recommended. The Supersonic’s magnets and airflow work best with genuine accessories. Third-party products may not fit securely or could affect performance and safety.
How Often Should I Clean the Dyson Supersonic’s Filter?
Clean the filter at least once a month. This prevents dust buildup, keeps airflow strong, and protects the motor. Use a soft brush to remove lint gently without damaging the mesh.
Before You Go
The Dyson Supersonic gives you control over heat and speed to protect your hair. Using the right attachment improves your styling results. Start by mastering one setting and attachment, then build your routine from there.
