How to Use Dyson Airwrap Curler: A Complete Guide for Perfect Curls
Learning how to use Dyson Airwrap curler means shaping your hair with less heat damage. Start by drying your hair to about 80% damp before styling.
This balance lets the curler finish drying and forming curls without over-drying. Avoid styling fully wet or too dry hair, as both can affect curl quality.
Attach the right Airwrap barrel to suit your desired curl size and direction. Smaller barrels create tighter curls, while larger ones give loose waves.
Hold the tool close and let the airflow wrap your hair around the barrel gently. You’ll get smooth, defined curls this way.
Use the cool setting to set curls after they’ve formed. This helps curls last longer and keeps hair shiny. Keep the temperature under 150 degrees to protect your hair from heat damage.
Using the Airwrap curler this way combines heat and air for long-lasting curls. This approach saves time and hair health.
Key Takeaways
- Start with towel-dried hair, about 75% to 85% dry, for best curling results.
- Choose barrels based on the curls you want, smaller barrels for tighter curls.
- Set airflow and temperature to moderate settings to protect your hair.
- Section your hair evenly to avoid tangles and ensure smooth curls.
- Let the Airwrap’s airflow wrap your hair around the barrel without forcing it.
- Use the curl direction control to match your desired style symmetry.
How to Curl Hair with the Dyson Airwrap Curler

Curling your hair with the Dyson Airwrap gets easier with the right steps. Your hair should be about 80% dry for the best curls.
The Airwrap curls hair by wrapping it around the barrel with air. This makes smooth curls without very hot heat.
Follow these clear steps to curl your hair properly and lock in the shape.
- Select the correct barrel size for your desired curl tightness.
- Turn on the Airwrap. Set high heat and airflow. Let it warm fully.
- Take a small hair section near the scalp. Point the barrel arrow where you want the curl. Hold it with thumb and forefinger.
- Hold the Airwrap near your hair. The Coanda airflow wraps the hair by itself.
- Wait about 8 to 12 seconds for the hair to heat and shape around the barrel. Gently move the Airwrap back and forth for tighter curls if desired.
- Press the cold shot button. Hold it 5 to 10 seconds. This cools and sets the curl well.
- Slide the barrel down slowly to release the curl without pulling or disturbing the shaped hair.
- Repeat for every section until your whole head is curled.
Holding the hair on the barrel for around 10 seconds works well for most types. Thicker hair may need longer hold time. Don’t hold too long to avoid heat damage.
Using the cold shot after wrapping cools your hair. This helps curls last by locking hydrogen bonds.
After curling, let your hair cool completely before touching it. This wait time helps the curls set fully and last longer.
The Airwrap does the hard work by blowing the right temperature air. So your curls stay smooth without frizz or damage.
Choosing the Right Barrel for Your Desired Curls

Your choice of barrel size controls the curl type you get from the Dyson Airwrap. The 40mm barrel creates loose, beachy waves. The 30mm barrel gives you classic, medium curls.
A smaller 20mm barrel, sold separately, is best for tighter, more defined curls. This decision depends on your hair length and how tight you want your curls.
Shorter hair works better with the smaller barrels since it wraps easily. The 30mm barrel works well for medium hair. It makes balanced curls.
These curls don’t look too tight or loose. Longer hair suits a 40mm barrel. It creates soft waves.
These waves aren’t tight rings. Picking the right barrel helps curls last longer and look more natural.
| Barrel Size | Curl Style | Hair Length Suitability |
|---|---|---|
| 20mm | Tight, defined curls | Short to medium hair |
| 30mm | Classic curls | Medium hair length |
| 40mm | Loose waves | Medium to long hair |
Use the 20mm barrel for tighter curls. It’s best if your hair ends near the chin or shoulders. It wraps smaller sections well.
The 30mm works best on hair that is shoulder-length to just below. It produces curls that look natural and hold well. The 40mm barrel suits hair that falls past the shoulders, making gentle waves instead of rings.
A barrel too large for your hair length can cause uneven curls. It might also make curls drop.
After picking your barrel, wrap damp hair around it steadily. Hold the curl close to your scalp for a few seconds to set the shape.
Let curls cool before touching them to keep them from falling flat. This small step works well with your barrel choice to create lasting curls.
Preparing Hair for Optimal Airwrap Curling Results
You want your hair about 80% dry before you start curling with the Dyson Airwrap. Starting with damp hair lets the Airwrap style and dry your hair at once. Using the right styling products protects your hair and helps curls last longer.
Optimal Hair Dryness: Why 80% Matters
Your hair should be damp but not wet when you start curling. Around 80% dryness means your hair is still slightly moist. This moisture helps the Airwrap dry your hair gently while shaping curls.
Your hair must not be too wet. The Airwrap won’t style well otherwise. It may also take longer to work.
Too dry, and the curls may not hold as nicely. Rough drying to about 80% gives the best balance of styling ease and curl hold.
Recommended Pre-Styling Products
Apply heat protectant and styling products before you dry and curl your hair. A good heat protectant guards against damage from the warm air. Styling creams or mousses add grip for better curl hold and definition.
Pick products suited for your hair type to avoid weighing hair down. Fine hair benefits from light sprays, while thicker hair can handle creams or serums. Spread products evenly through damp hair before you use your Airwrap.
- Heat protectant spray or cream designed for low to medium heat
- Light styling mousse for fine hair to boost hold
- Hydrating styling cream for thicker or dry hair
- Leave-in conditioner or detangler to smooth hair
- A bit of serum if hair tends to frizz
Products help curls last and keep your hair smooth during styling. Skipping them can lead to frizz or curl that falls out quickly.
Using the Pre-Styling or Coanda Dryer Attachment
Attach the pre-styling dryer or Coanda smoothing dryer to rough dry your hair first. Lift hair at the roots while drying to add volume and make sure roots dry well. Focus on the roots and areas behind your head since those spots are often missed.
Rough dry your hair until it feels damp but not wet, about 80% dry. This usually takes around 5 to 10 minutes depending on hair thickness. After that, brush small sections from root to tip.
Use either the soft or firm smoothing brush. Keep brushing until your hair is dry and smooth.
Start by drying and smoothing your hair base first. This helps the curling barrels shape your hair more easily.
It also helps curls last longer. Rough drying also reduces overall heat exposure since the Airwrap finishes drying during curling.
Sectioning Hair for Smooth and Even Curls
Sectioning your hair makes curling smoother and curls last longer. Work with small, manageable pieces for better control. The right size depends on your hair’s length and texture.
For fine or thin hair, pick smaller sections, about 1 inch wide or less. Thick or curly hair needs slightly larger pieces, around 1 to 1.5 inches, to avoid too many repeats and heat damage.
Long hair usually gets divided into more sections. Short hair gets fewer, but smaller ones help create volume and shape.
Try to keep sections even and detangled. This lets the Dyson Airwrap grab your hair easily and curl each piece well.
You’ll see smoother curls with good sectioning. If sections are too big, curls can look uneven or droopy.
- Start by brushing your hair to remove tangles. Smooth hair curls better and the Airwrap works easier.
- Divide hair into 4 to 6 main parts. Use clips to hold the upper layers while you curl the lower ones first.
- Create smaller curling sections from these parts. Choose 1-inch sections for most hair types, smaller for fine or short hair.
- Work with damp hair about 80% dry. This makes the Airwrap style and set curls without heat damage.
- Hold the Airwrap curler facing downward. Let it wrap the small section of hair from the tip upward automatically.
- Finish curling one section before moving on. This ensures curls set well and don’t tangle.
- Repeat for each section, clipping finished curls away. It keeps them neat while you curl the rest.
Short hair curls benefit from smaller sections for more volume and definition. Long hair may take bigger chunks but sectioning remains key.
Adjust size by trial. Finer hair curls with smaller sections, coarse hair with bigger pieces.
Setting Temperature, Airflow, and Curl Direction Correctly
The Dyson Airwrap offers three heat settings and three airflow speeds. High heat combined with high airflow works best for most curls.
This setting dries and styles damp hair fast. It helps lock in curls that last longer.
The Airwrap’s heat control measures air temperature over 40 times a second. This protects your hair from extreme heat damage. Keeping the temperature steady avoids burning your hair and helps curls hold their shape better.
You set the curl direction by picking the barrel with an arrow showing airflow. The arrow indicates the curl’s inward or outward direction.
To change curl direction, swap the barrel. Or flip it so the arrow points where you want.
The barrel’s dial changes airflow direction, which wraps your hair around it automatically. This improve Coanda airflow boosts control and smoothness. Wrapping around the wrong way can make curls look uneven or create kinks.
For tighter curls, use the 1.2-inch barrel with high heat and airflow. Wrap hair sections manually along the barrel’s curve, following the arrow for your desired direction. Hold each curl for about 10 to 15 seconds before releasing to set the shape well.
Lower heat and medium airflow suit fine or damaged hair better. It reduces risks of heat damage while still creating nice waves.
You may need to hold curls longer. Refresh with a light product after styling.
Always check the barrel arrows before curling to avoid awkward curl direction.
Wrong settings can cause curls that fall out quickly or hair that feels dry and brittle. Match heat, airflow, and barrel direction carefully.
This gives smooth, lasting Airwrap curls. Clean your tool regularly to keep airflow strong and styling consistent over time.
Finishing and Maintaining Long-Lasting Airwrap Curls
Set your curls with a cold shot for 10 to 15 seconds. This step helps lock in the curl shape and makes it last longer. Use finishing products to boost hold and refresh curls during the day without heat.
Using the Cold Shot to Lock in Curls
After curling each section, hold the cool shot on the curls for 10 to 15 seconds. This rapidly cools the hair and sets the curl in place. Hold the Airwrap in place while you do this; don’t let go too soon.
Make sure your hair is completely curled and heated before using the cold shot. Skipping this step can cause curls to drop quickly once released.
Push the power button up to turn on cold air. Switch it off before you let your hair go.
Best Products for Curl Hold and Shine
Choose styling products formulated to support curls without weighing hair down. Lightweight mousses, curl creams, and flexible hold sprays work well. Products with shine enhancers can improve the look without stiffness.
Try these options to keep your curls defined and shiny:
- Light hold mousse applied on damp hair before curling
- Flexible hold hairspray used after the cold shot
- Anti-frizz serum on mid-lengths and ends
- Lightweight curl cream to improve bounce
- Heat protectant spray before styling to reduce damage
Use sparingly to avoid buildup, which can weigh curls down. Apply finishing sprays at least 6 inches away from hair to avoid stiffness.
Day-Long Curl Care and Refreshing Tips
To refresh curls without heat, lightly mist your hair with water or a curl refresher spray. Scrunch hair by hand to reactivate the curl pattern. Avoid brushing, which can cause curls to lose shape.
Carries a small travel-size spray for midday touch-ups. Gently finger-comb curls to reduce frizz and separate them for a natural look. Try sleeping on a silk pillowcase to keep curls intact overnight.
Common Problems When Curling and How to Fix Them
Hair not wrapping around the barrel usually means it’s too thick. Thick roots can cause this issue as well. Try sectioning hair thinner for better wrap.
You should start wrapping about 4 inches (10 cm) from the ends. Hold the barrel steady and let the airwrap’s airflow pull in your hair, no twisting needed.
Pull the barrel gently away from your head to hold hair tight. This helps form smooth curls. Keep hair taut for best results.
Keep the hair wrapped for 10 to 15 seconds until it feels dry to the touch. Damp roots weigh curls down, so they may fall out fast.
Dry your roots well before curling. This keeps your curls longer.
- Start wrapping hair 4 inches from the ends
- Use medium heat for normal hair, lower for fine or damaged hair
- Hold curls in place for at least 10 to 15 seconds
- Pull the barrel away to keep hair taut for better curl
- Dry roots fully before curling for longer hold
- Use 20mm barrel for tighter curls on fine hair
- Avoid twisting or turning the airwrap during curling
Hair tangling often happens when sections are too thick. Divide hair into smaller segments and work slowly.
Use a heat protectant to reduce damage. You want smooth sections around the barrel, not bulky or messy bundles.
Losing curls quickly can also come from too much dampness or wrapping hair unevenly. Curling damp hair is fine, but roots need to be dry first. Hold each curl until it dries well to set it.
For most airwrap users, 15 seconds works. Don’t rush the drying time.
Adapting Airwrap Curling for Different Hair Types and Lengths
The Dyson Airwrap curler works well on all hair types and lengths. Adapting your attachment choice and technique based on hair texture and length will give better curls.
For example, short hair needs smaller barrels. Thick hair benefits from more heat and sectioning.
Curling Short Hair with the Airwrap
Short hair styles better with the smaller 1.2-inch barrels that come with most kits. These barrels help curl shorter strands without wrapping too much hair at once. Avoid using big barrels because they won’t grab the hair well and might cause uneven curls.
Keep sections tight and small, about half an inch wide. This helps the airflow wrap hair fully around the barrel. For coarse or curly short hair, add some styling cream.
This helps keep strands smooth while curling. Use only a small amount.
Set your Airwrap to the low heat setting for short hair. This protects delicate ends from damage. It also keeps curls bouncy.
Best Practices for Medium Hair
Hair from chin to shoulder length suits both the 1.2-inch and 1.6-inch barrels, depending on the curl type you want. Smaller barrels make tighter curls, while bigger barrels create looser waves. Choose based on if you want volume or soft curls.
For thick or curly medium hair, keep hair about 80% dry before styling. This leaves enough moisture for the Airwrap to attract curls without risking heat damage. Use the round brush attachment for gentle volume near roots.
Divide hair into sections about one inch wide for better airflow and even styling. Twist your hair smoothly around the barrel.
Hold it for 8 to 10 seconds. Then release gently to avoid kinks.
Styling Long or Thick Hair Effectively
Long hair works best with the larger 1.6-inch barrels for broader curls and waves. Using smaller barrels on long hair can take much longer and cause drying out. Use the highest heat for coarse or curly hair.
Keep curls moisturized by applying a leave-in conditioner. This helps maintain softness.
Section hair into larger but manageable parts, around two inches wide. This helps the Airwrap power fully shape the curl without pulling or tangling. The volumizing brush attachment can smooth ends or add body around the face.
Hold each curl for longer, about 10 to 15 seconds, to set the shape well. Avoid rushing; letting curls cool fully before touching them keeps waves looking fresh for days.
Step-by-Step Action Plan
Follow these steps to curl your hair with the Dyson Airwrap quickly and well. Each phase helps you get curls that last and look great.
- Before You Start: Wash and towel-dry your hair until it’s damp. The curls hold better on slightly wet hair.
- Section Hair: Divide your hair into small, even sections. You’ll get smoother curls with less frizz.
- Attach Barrel: Choose the barrel size that fits your curl style. Attach it firmly to the Airwrap device.
- Set Heat and Airflow: Select a medium heat and airflow setting. This avoids heat damage and curls last longer.
- Curl Each Section: Wrap your hair around the barrel with the airflow on. Hold for about 10 seconds until the hair cools.
- Release Curl: Turn airflow off and gently slide the barrel out. Let the curl cool in your hand for better shape.
- Finish Styling: Use a light hairspray or serum to hold curls and add shine. Avoid heavy products that weigh curls down.
- After Curling: Finger-comb or gently brush curls for a natural look. This keeps your curls from clumping or stiffening.
Frequently Asked Questions
Can I Use the Dyson Airwrap Curler on Wet Hair?
It’s best to use the Airwrap on hair that’s about 80% dry. Too wet hair might not curl well and could take longer to style.
How Long Does It Take to Curl Hair with the Dyson Airwrap?
Curling usually takes around 10 to 20 minutes depending on hair length and thickness. Sectioning your hair evenly helps speed up the process.
Can I Switch Barrel Sizes During Styling?
Yes, you can swap between 30mm and 40mm barrels for different curl types. Use smaller barrels for tighter curls and larger ones for loose waves.
Does the Dyson Airwrap Protect Hair from Heat Damage?
The Airwrap controls heat by measuring airflow over 40 times per second. This keeps temperatures below 150 degrees to reduce hair damage.
What Does the Curl Direction Setting Do?
The curl direction controls whether curls turn inward or outward. Switching directions can help you get a natural, balanced look.
How Do I Clean the Dyson Airwrap Curler Barrels?
Remove any hair strands and wipe barrels with a dry cloth after use. Keeping them clean prevents build-up and ensures smooth styling.
Wrapping Up
The Dyson Airwrap curler gives you beautiful curls with less heat damage. Practice these steps once or twice to get the hang of it. Try curling a few sections today for a fresh new look.
