how to use dyson air wrap

How to Use Dyson Air Wrap for Perfect Hair: A Complete Step-by-Step Guide

Wondering how to use Dyson Airwrap for perfect hair? Start by drying your hair to about 80% damp using the Coanda smoothing dryer attachment. This step removes excess moisture while keeping hair slightly wet, which helps the Airwrap style without overheating or causing damage.

Next, select the right attachment for your desired style, such as the barrel for curls or the brush for smooth looks. The tool’s intelligent heat control adjusts temperature quickly to keep heat below damaging levels and protect your hair’s natural shine.

Before you begin curling or smoothing, make sure your hair feels cool to the touch. This cool-down check ensures the heat distributes evenly, helping to avoid frizz and locking your style in place for longer.

Key Takeaways

  • Dry hair to roughly 80% with the Coanda dryer before styling with barrels.
  • Choose attachments based on style: curls, waves, volume, or smoothing.
  • Use the three airflow speeds and heat settings wisely to match your hair type.
  • Wrap hair around barrels gently for tight curls, or hand-wrap for loose waves.
  • Finish styles with a 10 to 15 minute cool-down before touching or brushing.
  • Keep hair damp but cool to the touch to avoid heat damage.

How to Use the Dyson Airwrap Step by Step

How to Use the Dyson Airwrap Step by Step

Styling your hair with the Dyson Airwrap works best when you follow a clear order. First, you prep and roughly dry your hair, then section it for easier handling. Curl or brush each hair section carefully.

Use the cold shot to set your style. This step locks in the look.

Sectioning your hair helps the airflow wrap each strand evenly. Smaller sections work best for even heat and airflow. Holding the hair on the barrel correctly prevents uneven curls or frizz.

  1. Rough dry hair: Use the Coanda smoothing dryer attachment first. Dry hair until about 80% dry or cool to touch. This helps prevent too much heat damage.
  2. Section hair: Divide your hair into small, manageable sections, about 1 to 2 inches wide. Smaller sections help the Airwrap work more efficiently.
  3. Select your attachment: Pick the curling barrel or brush you want. Use 30mm or 40mm barrels for curls. Choose based on the style you like.
  4. Wrap hair on the barrel: Take a small section of hair near the ends. Put the barrel close to those ends. Begin wrapping the hair around it. The airflow will attract and wrap your hair automatically.
  5. Hold in place: Keep the hair wrapped on the barrel for about 10 to 15 seconds. This time depends on your hair type and curl tightness preference.
  6. Activate cold shot: Slide the power button all the way up. Hold it there for 10 to 15 seconds. This sets your curl with cool air. Cold air sets the hydrogen bonds, helping the style last longer.
  7. Let the hair go carefully: Gently move the barrel downward, releasing the curl. Take it slow to maintain the curl’s form. Don’t tug or hurry this step.
  8. Repeat and finish: Style all hair sections the same way. Use the smoothing brush to fix any flyaways or frizz. Finish your look carefully.

Using the cold shot right after curling is key. It cools your hair, making the curls hold better and last longer.

Holding the cold shot for around 10 seconds works well for most hair types. Use longer if your hair struggles to maintain styles.

Pay attention to section size. Too big sections mean uneven styling and more time spent drying.

Small sections get the Airwrap’s airflow and heat evenly, preventing frizz and helping curls form smoothly. After finishing, gently run the brush attachment through styled hair for a soft, polished look.

Which Attachments to Use for Different Hair Styles

Which Attachments to Use for Different Hair Styles

The Dyson Airwrap includes several attachments designed for styling different hair types and creating specific looks. Each attachment serves a clear purpose, from drying damp hair to curling or smoothing. Using the right piece makes styling faster and improves the results.

Attachment What It Is For Use On
Pre-styling or Coanda smoothing dryer Wet to damp drying, smoothing flyaways Wet or damp hair
Curl barrels (30 mm and 40 mm) Wrapping sections into curls or waves Damp hair
Firm or soft smoothing brush Straighter, smoother finish Damp hair
Round volumizing brush Raise hair at the base and create a slight curve at the tips Damp hair
Diffuser or wide-tooth comb (curly kits) Defining or stretching curls and coils Wet to damp hair

Most attachments click on and off easily. So you can switch between them for layered styles. Keeping some moisture in your hair before curling or brushing helps these tools work best.

Curling Barrels: 30mm vs 40mm

The Airwrap offers 30mm and 40mm curling barrels to create curls or waves. The 30mm (1.2 inch) barrel makes tighter curls. It fits short to medium hair and smaller curl styles.

The 40mm barrel produces big, loose waves. It’s good for adding volume and curls on longer hair. Both barrels should be used on damp hair, about 80 to 90% dry.

You wrap hair sections around the barrel in the direction indicated by arrows. The airflow uses the Coanda effect to curl without extreme heat.

Smaller barrels hold tighter curls longer. Larger barrels give a softer, bouncier look.

Smoothing Brushes: Firm vs Soft

The firm smoothing brush works well on medium to thick hair for a sleek, smooth finish. It helps straighten hair while reducing frizz and blow-drying at the same time. Use it on damp hair after pre-drying with the Coanda dryer.

Soft smoothing brushes have gentler bristles and suit fine hair better. They protect delicate strands while smoothing flyaways and adding shine. It’s ideal for people who want a straighter finish without pulling on their hair.

Both brushes can prepare hair before curling or create straight styles. Lock the brush onto the handle by twisting it clockwise clockwise. Always keep hair damp but not dripping wet when using brushes.

Round Volumizing Brush Uses

The round volumizing brush lifts hair roots and bends ends softly. It works best on damp hair that is about 80% dry.

Use it to create volume without tight curls. It adds a natural shape to flat or fine hair.

This brush can slightly curl hair but is not as strong as the curling barrels. Most people use it layer by layer after pre-drying their hair. Switching to the volumizing brush after pre-drying helps finish styles with soft body.

Keep hair about 80% dry before switching to round or smoothing brushes to avoid heat damage.

How to Prepare Your Hair for Best Styling Results

Start with hair that’s mostly dry but still damp enough to style. Rough dry your hair using the Airwrap’s pre-styling attachments until it’s about 75% to 85% dry. This level helps the Airwrap curl and shape better without dragging or uneven drying.

Ideal Hair Moisture Level (75%-85%)

Your hair should be damp but not dripping wet when using the Airwrap. Hair that’s too wet is heavy and won’t wrap smoothly around the barrel. Overly dry hair won’t catch the airflow needed for curls.

It lacks moisture that helps hold shape. This makes curling or waving harder.

Use the Pre-styling dryer or Coanda smoothing attachment first. Spend 5 to 10 minutes drying your hair until there is no excess water left. The hair feels slightly damp to the touch, roughly 75% to 85% dry.

Recommended Pre-Styling Products

Choose heat protectants that suit your hair type and style goals. Lightweight sprays or creams help protect your hair without weighing it down. Avoid heavy oils before styling, as these can reduce the Airwrap’s suction effect.

Try products that promote hold and smoothness, especially if you want long-lasting results. Apply evenly from roots to ends, focusing more on mid-lengths and tips where you style curls. Too much product can cause buildup and reduce the tool’s effectiveness.

  • Use a heat protectant spray or serum
  • Apply a lightweight mousse for volume
  • Choose smoothing cream for frizzy hair
  • Work products through hair evenly using a brush
  • Wait 2 to 3 minutes for products to absorb

Detangling and Sectioning Tips

Detangle hair gently with a wide-tooth comb or a wet brush before styling. This prevents snags that slow down styling and cause uneven curls. Start at the tips and work your way up to avoid breakage.

Divide hair into 2 to 4 sections depending on thickness for better control. Smaller sections let the Airwrap style more precisely and reduce repeated handling. Comb through each section before wrapping hair around the Airwrap barrel.

How to Create Different Curls and Waves with Airwrap

The Dyson Airwrap lets you create tight curls, soft waves, and natural body with ease. Use the right barrel size and wrapping method to get your desired style. Timing each section on the barrel and using the cooling setting helps your curls last longer.

Using the 30mm Barrel for Defined Curls

The 30mm barrel works best for tighter, more defined curls. This size works well for hair shorter than collarbone length.

It also suits you if you want polished curls. Wrapping your hair fully around the barrel creates tension and tighter shape.

Hold your hair on the barrel for about 10 to 12 seconds. This gives enough time for the curl to set before releasing. Use the cooling function right after curling each section to lock the curl in place.

  1. Select the 30mm Airwrap barrel matching the curl direction you want.
  2. Start with damp, towel-dried hair and set the Airwrap to medium heat.
  3. Wrap a 1-inch hair section fully around the barrel from roots to ends.
  4. Hold for 10 to 12 seconds without pulling or sliding the barrel.
  5. Press the power button to switch to the cool shot for 10 seconds.
  6. Release the curl gently and move to the next section.
  7. Finish by styling curls with your fingers or a light hold spray.

Using the 40mm Barrel for Loose Waves

The 40mm barrel produces soft, voluminous waves perfect for natural styles. This size works well on long hair beyond collarbone length. Direct airflow away from your face for a smooth, face-framing effect.

Hold each section on the barrel for 10 to 15 seconds for gentle waves. Letting the airflow do most of the work helps relax the wave shape. Finish with a cool shot to keep the waves lasting.

  1. Attach the 40mm Airwrap barrel suited for clockwise or anti-clockwise curls.
  2. Work with slightly damp hair and choose a medium heat setting.
  3. Wrap a wider hair section loosely around the barrel by hand.
  4. Hold the section for about 10 to 15 seconds, pulling away from your face.
  5. Switch to cool air for 10 seconds to set the wave.
  6. Release hair carefully and repeat on all sections.
  7. Comb through gently for soft, flowing waves.

Hand Wrapping for Soft Styles

For relaxed, natural styles, wrap your hair around the barrel manually instead of using air suction. This technique gives you control over curl tightness and shape. It suits waves or curls that look less styled and more easy.

Hold your hair on the barrel for 15 to 20 seconds. This helps set the curl better.

Using the cool shot after helps curls stay in place without extra heat. This method also works well on thicker or textured hair types.

  1. Choose either the 30mm or 40mm barrel depending on curl size.
  2. Start with towel-dried hair and medium heat on the Airwrap.
  3. Pick up a hair section and wrap it around the barrel by hand.
  4. Hold the hair in place for 15 to 20 seconds, creating gentle tension.
  5. Use the cooling setting for 10 seconds before releasing the hair.
  6. Repeat on remaining sections for consistent curl or wave.
  7. Finish with fingers or brush for a soft, natural look.

How to Add Volume and Body with the Airwrap

The round volumizing brush is great for boosting hair volume with Dyson Airwrap. It lifts roots while drying, adding body and bounce. The Airwrap shapes hair gently using airflow, not just heat.

Start by drying your hair about 80% with the pre-styling dryer. Lift each section of hair at the roots while drying to boost volume. Roots must be fully dry for volume to last.

Damp roots make hair fall flat faster. Thick hair especially needs careful drying at the roots.

Wrap a section of hair around the round brush and pull upward away from the scalp. The brush adds lift and smooths strands at the same time.

Use the cool shot button to set the volume in place. This locks the shape while cooling the hair.

  • Pre-dry hair to about 80% dampness with the drying attachment
  • Work in small sections, lifting hair at roots with round volumizing brush
  • Pull brush upward for root lift and run slowly to dry each section fully
  • Switch to cold air on the Airwrap to set the lifted style
  • Add a light spray of flexible hold hairspray to maintain volume all day

Dry your roots completely to keep volume all day. Finish with a cool shot to lock the style. This helps your hair stay full and bouncy.

Adding a flexible hold hairspray prevents flattening without making hair crunchy. A little product helps curls stay bouncy.

Don’t wrap hair too tight on the brush or volume can look flat or misshapen.

For thicker hair, spend extra time lifting roots fully with the brush attachment. Use the Flyaway Smoother setting for a sleek root finish. This feature helps tame stray hairs near your scalp.

It smooths your hairstyle while drying. Fine hair may need smaller sections for better root lift.

Common Dyson Airwrap Mistakes and How to Fix Them

Hair not curling well often happens when the Airwrap is used on completely dry hair. This tool works best on damp hair because it shapes and dries at the same time. Using the Airwrap on dry hair can cause weak curls that fall out quickly.

Frizz appears mostly because of too much heat or wrong attachment use. Since the Airwrap relies on air, setting heat too high can roughen your hair cuticles. Use a medium heat setting to style your hair.

Avoid touching your hair too much after. This helps keep your style longer and healthier.

Uneven curls form if hair sections are too thick. They also happen when you turn the barrel wrong. Keep sections thin and have the barrel face the right way.

Thick sections take longer to set and can end up straighter. Turning the barrel inconsistently leads to curls going opposite ways, spoiling the look.

  • Use sections about one inch wide for even curls
  • Start curling near the roots but leave a small tip uncurled
  • Choose the right barrel direction for consistent curl flow
  • Set heat to medium or low to protect hair and reduce frizz
  • Use the cool shot button to lock in curls
  • Prep hair lightly with mousse for better hold
  • Let curls cool before touching or brushing

Using too high a speed might blow your hair around too much, causing tangles and frizz. Medium or low airflow helps you control hair better during styling.

Also, avoid rushing the process. Hold each curl for about 8 to 12 seconds to let it set well.

Frizz is also due to lack of prep or dampness. Applying a small amount of mousse can help curls hold better and stay smoother.

The Airwrap dries hair gently. So if your hair is wet enough, it should leave curls defined without heat damage.

How to Care for Your Dyson Airwrap and Attachments

Cleaning your Dyson Airwrap regularly keeps it working well and protects your hair from buildup. Dyson suggests cleaning the filter about once a month or whenever the filter light flashes. The filter can get clogged with dust or product residue.

This blocks airflow. When airflow is blocked, the styler shuts off.

To clean the filter, first turn off and unplug your Airwrap. Use the small cleaning brush that came with it to gently wipe the filter cage. Remove the filter cage if you see stubborn dirt.

Rinse it under warm water. Let it dry completely before putting it back. Avoid using harsh chemicals or soaking the main unit to prevent damage.

Each attachment needs different care to stay in good shape. The curling barrels, brushes, and smoothing brushes all collect hair strands, dust, and product oil. Wipe them after every few uses with a soft, damp cloth.

For brushes, carefully pull out hair stuck in the bristles. Don’t use too much water on attachments with electronics or vents. Just wipe them down.

  • Clean the filter every 4 weeks or when the filter light flashes
  • Use the cleaning brush to remove debris from the filter cage
  • Rinse the filter cage with warm water and dry before reinstalling
  • Wipe attachments with a damp cloth after every few uses
  • Remove hair from brush attachments to avoid tangles
  • Never immerse the main unit or attachments in water
  • Store the Airwrap in its original box or a dry, cool place

Storing the Airwrap properly protects it from dust, moisture, and damage. Keeping it in the original box or a stand designed for the Airwrap is ideal. Don’t leave it near heat or direct sunlight.

Heat can warp plastic parts. It can also hurt the motor.

Make sure all parts are dry before storing. Wet attachments can grow mold or damage electronics. Store cables loosely to avoid kinks that shorten their life.

Regular care helps your Airwrap last longer. It keeps your hair looking great. It also stops surprise tool failures.

Which Styling Products Work Best with Dyson Airwrap

Heat protection is key when you style with the Dyson Airwrap. Even if it doesn’t use extreme heat, your hair still needs a shield to avoid damage. Look for heat protectant sprays that are lightweight and won’t weigh your hair down.

Hair oils and serums add shine and softness. Picking the right one matters. It makes a big difference in your hair’s look.

Use oils designed for fine hair or serums with a non-greasy formula. Use a small amount of product.

About a pea-size is enough on your palms. This stops your hair from getting oily or flat.

Adding a dry texture or sea salt spray helps curls hold longer. You apply it before styling. This step helps curls last.

These sprays create grip and prevent curls from loosening quickly. Focus on areas that tend to fall flat, usually the ends or longer layers.

  • Use a heat protectant spray that suits your hair type, like Color Wow Dream Coat.
  • Apply dry texture spray on damp hair to add hold before Airwrapping.
  • Choose light oils or silicone-free serums to prevent weighing hair down.
  • Work with hair that’s about 20, 30% damp for better curl hold.
  • Wrap thin, consistent hair sections for longer-lasting styles.
  • For fine or color-treated hair, use lower heat and add drying time.
  • Spray a light mist of finishing spray after styling for extra hold.

Don’t skip heat protectant just because Airwrap uses less heat; it still prevents damage.

Use a light hairspray or finishing mist after styling. This keeps curls in place for days. It holds your style gently.

Avoid heavy sprays that make hair crunchy or sticky, which can ruin your style’s natural look. For extra hydration, add serum to dry ends.

This keeps shine without flattening curls. It refreshes hair between washes.

Products that protect hair and lock in style give the most satisfying results. Selected right, they keep the Airwrap’s curls bouncy and smooth without risking damage or dullness. Try different sprays and oils to find your best match.

Your hair type and routine matter here. Experiment to see what works. The cost can vary: a good heat protectant spray may range from $15 to $40.

Step-by-Step Action Plan to Master Your Dyson Airwrap

Follow this plan to get comfortable using the Dyson Airwrap and nail your favorite styles. Track your progress by checking how easy and smooth styling feels each time.

  1. Before you start: Wash and towel-dry your hair until damp. Your hair should not be dripping wet for the best Curling and Voluming results.
  2. Day 1: Try curling with one Airwrap barrel attachment on a small section. Stop when the curl holds after cooling to know it worked.
  3. Day 3: Practice adding volume using the round volumizing brush. Check your scalp feels lifted and your hair looks fuller.
  4. Day 5: Experiment with switching between curling and smoothing attachments to create waves and sleek finishes. See if you can style a whole head smoothly.
  5. Week 2: Use a heat protectant spray before styling to protect your strands. Your hair should look shinier, not dry, the next day.
  6. Week 3: Clean the filter and attachments as per the manual. You’ll notice your Airwrap runs quieter and performs better.
  7. After 4 weeks: Try a more complex hairstyle. Alternate curl directions or add volume at the roots. The style should hold longer without touching up.

Frequently Asked Questions

How Does the Coanda Effect Help Style Hair with the Dyson Airwrap?

The Coanda effect curves air to attract and wrap hair onto the barrel. This lets you style without twisting the tool or pulling hair harshly, reducing damage risk.

Can You Control Heat and Airflow with the Dyson Airwrap?

Yes, it has three airflow speeds and three heat settings. The tool checks air temperature more than 40 times each second. This helps keep the heat safe for your hair.

Is It Better to Manually Wrap Hair or Let the Airwrap Do It?

You can do either. Wrapping by hand gives looser curls. Letting the air wrap your hair results in tighter curls.

How Long Should You Hold Hair on the Barrel to Create Curls?

Hold it in place for 15 seconds to dry hair gently. This timing helps form curls without overheating strands.

What Does the Cold Shot Button Do on the Dyson Airwrap?

The cold shot locks in your style by cooling hair and sealing hydrogen bonds. This helps your curls or waves last longer.

What Is the Best Hair Dryness Level Before Using the Curling Barrels?

Hair should be about 80% dry or just cool to the touch before styling. This avoids excess heat damage and improves results.

Before You Go

The Dyson Airwrap can style your hair many ways with practice. Start with small steps and get used to each attachment. Grab your Airwrap and try out a simple curl today.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *