how to curl hair with ghd

How to Curl Hair with GHD: Simple Steps for Perfect Long-Lasting Curls

Wondering how to curl hair with GHD for smooth, long-lasting waves? The key is using the right heat setting and proper sectioning.

Start with clean, dry hair and apply a heat protectant spray before you curl. This prevents damage and helps the curls last longer.

Section your hair evenly, just like when straightening, to make sure every strand feels the heat. Use clips to keep sections separate and manageable.

Curl your hair by twisting the styler 180 degrees. Pull it down slowly to create soft curls that hold well and look natural.

Remember, spraying a curl hold product before you start locks in shape and shine. Lightly mist a flexible hold hairspray once you finish for extra staying power. Stay away from high humidity because it ruins curls fast.

Humidity over 90% moisture is especially bad. It breaks down curl shape quickly.

Key Takeaways

  • Apply heat protectant spray about 5cm below the roots under your hair.
  • Divide hair into sections from bottom to top for easier curling.
  • Start curls near the roots and twist the styler 360 degrees for volume.
  • Clamp hair, turn the styler 180 degrees, wait a second before moving down.
  • Use GHD Curve 2.0 for defined waves and the Rise brush for fuller curls.
  • Spray curl hold spray before curling to extend the life of your style.

How to Curl Hair with GHD Stylers Step-by-Step

How to Curl Hair with GHD Stylers Step-by-Step

Start curling your hair by working with clean, dry hair sprayed with GHD Curl Hold spray. This spray protects from heat and helps the curls last longer. You’ll get smoother curls using a GHD styler compared to curling wands or tongs.

Sectioning your hair is key to even curls. Divide your hair into manageable parts so you can curl each section without missing any strands. Alternating the direction of curls adds natural-looking volume and texture.

  1. Section your hair into four parts: two at the front and two at the back. Clip each section to keep it separate.
  2. Select a one-inch section from the bottom of one clipped part. Avoid clamping the styler near your roots to prevent heat damage close to the scalp.
  3. Clamp the styler gently near the middle of the hair section. Twist it 180 degrees away or towards your face to create the curl. Hold it for about 5 seconds to shape the curl.
  4. Release the hair and let the curl drop softly. Avoid pulling or brushing the curl immediately to keep the shape intact.
  5. Alternate the curl direction with each new section. Curl some away from your face. Then curl others towards it. This creates a more natural look and fuller volume.
  6. Repeat on all sections until your whole head is curled. Work quickly but carefully to avoid overheating any part.
  7. Let your curls cool completely before touching them. This sets the curl and helps it last longer.
  8. Finish with a light spritz of curl hold spray. This locks in the style without stiffness.

Don’t clamp the styler tightly. The heat and twisting action shape curls better than pressure alone.

Holding the styler longer than 5 seconds can dry the hair ends. So keep the timing consistent for healthy curls.

Choosing the Right GHD Tool for Curling

Choosing the Right GHD Tool for Curling

The best GHD tool for curling depends on your hair type and curl style. The GHD Curve range excels at soft, natural curls.

For tighter ringlets, the Mini styler works well, especially on thin hair. Thick or unruly hair suits the Max wide plate for fuller, bigger curls.

Using a straightener to curl hair is common and effective. You clamp a hair section and twist it 180 degrees. Then you pause and slide down 2 inches.

After that, twist the other way to finish. The GHD straighteners heat-monitor 250 times per second, keeping the temperature steady. This prevents damage and ensures consistent curls.

The Curve curlers and wave wands create special looks. You can get Hollywood waves or soft curls that last. These tools give you more styling options.

GHD Tool Best For Hair Type Curl Style
GHD Curve 2.0 Wave Wand Dramatic, Hollywood waves All types Loose, deep waves
GHD Rise Hot Brush Full-bodied, blow-waved curls Fine to medium Soft, voluminous curls
GHD Mini Styler Tighter, smaller curls or ringlets Thin, fine hair Tight curls
GHD Max Wide Plate Large, fuller curls or waves Thick, coarse hair Big, loose curls
GHD Classic Straightener Curly, wavy or straight versatile styles All hair types Everyday curls and waves

Larger hair sections create loose waves while small sections form tighter curls. Picking the right tool helps avoid damage and poor curl hold.

Using heat protectant spray always helps protect strands, especially with higher heat or frequent styling. GHD stylers adjust heat to suit your hair, which reduces burn risk.

Never curl your hair without applying a heat protector spray first for safety.

Consider curling when your hair is a day old for better hold and texture. Straighteners can double as curling tools if you use the twist and glide technique. For long lasting curls, gently hold curls for a second before gliding down.

Preparing Hair Properly Before Curling with GHD

Preparing your hair before curling protects it from heat damage. It also helps your curls last longer. Use the right products first.

You want clean, dry hair that’s properly sectioned and protected with a good heat spray. This make sure you get smooth curls without frying your strands or losing the hold quickly.

Choosing the Right Heat Protectant

Using a heat protectant spray before curling blocks damage and seals moisture inside your hair. Look for lightweight sprays that won’t weigh your hair down or make it look greasy. Moroccanoil Heat Protect is a popular choice because it protects without adding oiliness.

Spray the product evenly over your dry or towel-dried hair before you start styling. Hold the spray about 6 to 10 inches away to cover your strands lightly but fully. Let the product soak into your hair for one minute.

This stops moisture from getting trapped under heat. Trapped moisture can cause breakage.

Why Hair Should Be Dry and Slightly Textured

Never curl wet or fully damp hair with a GHD styler. Wet hair is weaker and more prone to heat damage. It also doesn’t hold curls well and can make the styler snag or pull your hair.

Dry hair with a bit of texture holds curls better and glides through the styler smoothly. You can towel dry then air dry, or use a blow dryer after applying heat protectant. A light styling mousse or texturizer helps hold curls better.

It keeps curls in place longer without making them stiff. Use just a small amount.

How to Section Hair for Even Curling

Working with sections makes curling easier and more even. Work with small to medium sections of hair for curling. This makes it easier for your GHD styler to glide smoothly.

It helps avoid missing strands. Large sections won’t curl well, and tiny ones take too long to finish.

  • Divide hair into three to four horizontal layers from bottom to top
  • Clip upper layers out of the way while curling the bottom ones
  • Take 1-inch wide vertical subsections from each layer
  • Keep sections uniform for consistent curl shape and heat exposure
  • Start curling from eye level to the ends, holding the styler at a 45-degree angle

Take your time to keep the hair smooth and avoid clumping. Even, separated sections prevent uneven heat, helping each curl stay bouncy and strong for longer.

Optimal Heat Settings and Curling Techniques

Set your GHD styler to around 335°F (170°C) for most hair types. This temperature is hot enough to create long-lasting curls but gentle enough to reduce damage. Use higher heat only if your hair is very thick or coarse.

High heat can cause your hair to break. It’s safer to avoid those settings.

For fine hair, lower the heat to about 300°F (150°C). This protects delicate strands and prevents unnecessary dryness.

Thick or coarse hair might need 365°F (185°C) to form curls. But keep sessions short to avoid overheating.

Hold the styler vertically near the roots to start your curl. Wrap a 1-inch section of hair around the barrel, away from your face, for natural-looking curls. Rotate the styler 180 degrees.

Then slowly pull it down the hair shaft. This shapes and sets the curl.

Smaller curls use thinner sections and a tighter wrap around the styler. Larger, looser curls require wider sections and less twisting. Always move the tool smoothly and steadily to avoid creases and uneven curls.

For fine hair, work quickly without holding the styler too long on each section. About 5 seconds per curl is enough to avoid heat damage.

Thick hair needs a slower approach, around 8 seconds. So curls form properly but stay healthy.

Adjust pressure depending on hair texture. Use a light grip on fine hair to prevent flattening. Firm but gentle pressure helps shape thick hair without causing frizz.

Keep your strokes even and consistent to get uniform curls. Check curls during styling and repeat on any loose parts until your hair all matches. This might take a few tries, especially with longer or thicker hair, but patience pays off.

Using heat protectant spray beforehand helps preserve your hair’s moisture. Curling without it raises the risk of dull, brittle hair. Let your curls cool completely before touching them to lock in shape and avoid frizz.

Curl Styles You Can Achieve with a GHD Styler

You can achieve several styles with a GHD styler, from soft waves to tight curls. Different techniques and heat settings unlock these looks. Each style suits different occasions and hair types.

Creating Soft Beach Waves

Soft beach waves look relaxed and natural, perfect for everyday wear. Use the styler to curl large sections of hair away from your face. Let the curls cool before running your fingers through them to loosen and soften the waves.

Start by taking thick strands and clamping the styler about two inches from the roots. Twist the styler vertically and slowly glide it down your hair for easy waves.

For a sleeker finish, run a comb in front of your styler. Do this as you curl each section of your hair. It helps smooth the hair and gives a cleaner look.

  • Use medium heat around 350°F for gentle curls
  • Clamp hair vertically and twist the styler away from your face
  • Work with thick sections to avoid tight curls
  • Let curls fully cool before touching
  • Run fingers through curls to create messy, soft waves

Classic Vintage and Hollywood Waves

This style features smooth, structured waves with defined “S” shapes. Use smaller hair sections and a slower curling speed. After curling, brush out each wave carefully for a polished look.

Clamp the styler vertically and twist tightly with firm pressure. Always rotate front sections away from your face. Let curls cool completely before combing through gently for that old Hollywood glam.

  • Use slightly higher heat (around 375°F) for strong hold
  • Curl smaller strands for more precise waves
  • Brush through curls after cooling for smooth waves
  • Keep curls tight and uniform with slow passes
  • Do not rough up the waves, keep them sleek

Tousled Glamour and Messy Curls

Tousled curls have more volume and texture, great for casual or party looks. Curl hair in random directions to create natural movement. After curling, run your fingers or a wide-tooth comb through for a messy effect.

Start near the roots, twisting the styler away from your face except on front strands. Vary strand thickness and curling time for unpredictable curls that feel easy but stylish.

  • Use medium heat (around 350°F) for manageable curls
  • Curl different strand sizes and alternate curl directions
  • Rough curls up with fingers for added texture
  • Focus on curling front hair away from your face
  • Use a light hairspray to hold volume without stiffness

Always allow curls to cool fully before styling them with hands or brushes for best results.

Common Curling Mistakes and How to Fix Them

Curling hair with a GHD styler can be tricky if you make some common mistakes. One problem is using too much heat or holding the tool in one spot too long. That can cause damage and frizz instead of smooth, lasting curls.

Try setting the heat between 300°F and 365°F for most hair types. Limit each section’s curl time to 8-12 seconds. This helps avoid damage while curling.

Another frequent error is not prepping hair properly before curling. Skipping heat protectant spray or curling hair when it’s still damp can ruin your style.

Make sure your hair is fully dry and coated with a lightweight thermal protector. This helps the curl last longer and keeps hair shiny without dryness.

Sometimes curls don’t hold because the sections are too big or the hair is too clean. Smaller sections make better curls, about 1-inch wide each. Lightly dirty hair holds heat better than freshly washed hair.

This helps curls form more easily. Spray a little texturizing spray before you start styling to help curls hold. This stops curls from dropping too fast.

  • Don’t overuse heat; 300-365°F is enough
  • Use a heat protectant spray on dry hair
  • Curl smaller 1-inch sections for stronger curls
  • Let hair cool fully before touching curls
  • Finish with a strong hold hairspray to lock curls
  • Brush curls gently with spray mist to blend

Frizz can show up if you skip cooling time after curling. Let hair cool completely before touching or brushing the curls. Cooling helps fix the shape.

Finish by misting a firm hold hairspray over your curls. This locks them in place. It keeps your style lasting longer.

Spritz a little hairspray on your paddle brush before brushing curls. Running it through blends curls into softer waves. This keeps the curl pattern intact.

Fixing these issues usually doesn’t take new products or fancy tools. Focus on smaller sections, proper heat, and locking curls with cooling and hairspray.

Your hair will look smoother, last longer, and feel healthier with just these small adjustments. Adjust these steps based on your hair texture and thickness for the best results.

Maintaining and Extending the Life of Your GHD Curls

After curling your hair with a GHD styler, let the curls cool completely before touching them. Cooling helps the curls set, so they last longer and stay bouncy. Don’t run your fingers through your hair while warm.

Avoid brushing it too. Curls can lose shape quickly this way.

For brushing, use a wide-tooth comb or your fingers to gently separate the curls. Avoid fine combs or brushes, as they can cause frizz and break the curl pattern. Want more volume?

Shake your hair lightly at the roots. Or flip your head upside down and gently tousle.

Choose finishing products based on the type of curl hold and shine you want. A light hairspray with medium hold keeps curls flexible without stiffness. For stronger hold, use a curling mousse or a styling cream designed to improve curls.

Want soft curls with shine? Use a few drops of hair oil. Apply mostly to the ends, not the whole hair.

  • Let curls cool for 5 to 10 minutes before touching them
  • Use fingers or a wide-tooth comb to separate curls gently
  • Shake hair at the roots for extra volume
  • Apply medium-hold hairspray for flexible hold
  • Use curling mousse or cream for stronger, longer-lasting curls
  • Lightly add hair oil or serum for shine and softness
  • Avoid brushing curls when warm to prevent frizz

Keep hair dry after styling to avoid curls losing their bounce. Your curls might drop fast if hair gets damp from sweat or humidity. To refresh curls without re-curling, mist them lightly with water.

Add a bit of styling product next. Then reshape curls with your fingers.

Different hair types need specific care after curling. Thick or coarse hair often holds curls better and needs less product. Thin or fine hair might require more mousse or hairspray to keep curls defined.

Start with just a small amount of product. Too much can weigh curls down or make hair stiff.

Safety Tips and When to Consult a Hair Professional

Curling hair with a GHD styler involves heat, so safety is key. Protect your hair and skin by following basic heat guidelines and watching for damage. Know when to call a pro for hair trouble.

Spot signs of damage early. Ask for styling help when needed.

Essential Heat Safety Practices

Always use a heat protectant spray before curling to reduce damage. Make sure your hair is dry, or heat can cause breakage and uneven curls. Keep the styler temperature below 365°F (185°C) for most hair types to avoid burning strands.

Use these simple steps every time you curl:

  • Apply heat protectant evenly on clean, dry hair
  • Set your GHD styler to medium heat unless your hair is very thick
  • Work in small sections to avoid overexposure
  • Keep the styler moving; don’t hold it in one spot
  • Let curls cool before touching or combing
  • Avoid curling hair more than twice a week

Keep the GHD tool clean and free of product buildup to prevent uneven heat.

Recognizing Signs of Hair Damage

Check your hair regularly for dryness, brittleness, or split ends. These signs mean your hair needs a break from heat styling. You might also notice dullness or breakage when brushing after curling.

Damage gets worse if you ignore these signs. Give your hair moisture treatments or switch to lower heat settings. Avoid curling when hair feels fragile or looks unhealthy.

When to Visit a Hair Stylist

See a professional if you notice severe breakage or uneven texture from heat damage. A stylist can assess your hair’s health and recommend treatments or trims. Professionals also handle complex styles safely, especially for damaged or chemically treated hair.

Use this checklist to decide if you need a pro:

  • Hair breaks off easily at the ends
  • Your scalp feels irritated or burns after heat styling
  • Curls don’t hold or look uneven repeatedly
  • You want a new style requiring advanced heat techniques

A licensed stylist can fix damage and teach safer curling habits tailored to your hair.

Your First Steps: Quick-Start Action Plan for Curling with GHD

Follow this simple plan to get your curls looking great fast. Each step builds your skills and sets you up for success.

  1. Before you start: Wash and dry your hair completely. Check it’s smooth and ready to curl.
  2. Right away: Apply heat protectant spray evenly. This stops damage and keeps hair shiny.
  3. First curling session: Set your GHD styler to medium heat (around 350°F). Curl small sections to see how your hair holds the shape.
  4. After curling: Let curls cool untouched for 10 minutes. This helps them set firmly.
  5. Day 2: Use your fingers to gently separate curls. Look for natural volume while avoiding frizz.
  6. Within the week: Adjust heat settings if curls drop quickly. Lower heat for fine hair, higher for thick hair.
  7. Weekly care: Sleep with hair in a loose braid or use a silk pillowcase. This keeps curls intact longer.

Frequently Asked Questions

Can I Use GHD Curl Hold Spray Before Curling?

Yes, spray GHD Curl Hold spray before curling your hair. It protects from heat and helps curls last longer.

How Do I Section Hair Before Curling with GHD Stylers?

Section your hair evenly before curling for consistent results. This helps every strand get curled well and look uniform.

Can I Curl Hair with Any GHD Styler?

You can curl hair using most GHD stylers. The GHD Curve works best for soft curls. Its shape helps wrap hair easily.

Is It Okay to Curl Hair Without Heat Protectant?

Never curl hair without heat protectant. It prevents damage from high temperatures and keeps hair healthy.

How Do I Make My GHD Curls Last All Day?

Using curl hold spray and letting curls cool fully helps them last. Avoid touching hair too much to keep curls intact.

Why Do My Curls Fall Out Quickly After Using GHD Stylers?

Curls fall out fast if hair is too clean or slippery. A bit of natural oil helps curls hold better for longer.

Final Thoughts

Mastering curls with your GHD styler comes from practicing these simple steps. Start with heat protection and small curls today. Watch your style improve quickly as you build confidence.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *