Is Color Wow a Heat Protectant? What Actually Works for Heat Styling
Is Color Wow a heat protectant? Yes, it actually is a heat-activated product that protects hair up to 450 degrees.
It shields your strands from heat damage while keeping frizz and humidity at bay. You get two benefits in one: heat protection and anti-frizz control.
Color Wow Dream Coat uses vegan keratin and argan oil to form a lightweight shield. This barrier smooths the hair cuticle and locks out moisture during heat styling. The formula is non-greasy, so it won’t weigh your hair down or leave residue.
Before using Dream Coat, apply it on clean, towel-dried hair for best results. Watch out for over-application, which can make hair feel stiff or sticky. A little goes a long way to keep your hair frizz-free and protected all day.
Key Takeaways
- Color Wow Dream Coat protects hair from heat up to 450 degrees Fahrenheit.
- It contains vegan keratin and argan oil to smooth and shield hair.
- Apply Dream Coat on clean, damp hair for maximum heat protection.
- Avoid applying too much product to prevent stiffness or stickiness.
- Dream Coat works well for both frizz control and heat styling.
- The formula is lightweight and leaves no greasy residue behind.
Is Color Wow Dream Coat a True Heat Protectant?

Color Wow Dream Coat is not a traditional heat protectant but offers some heat protection. It’s a heat-activated spray applied to damp hair before blow drying. This formula creates a barrier that shields your hair from damage up to moderate heat levels.
Its heat protection works by sealing each hair strand tightly. This cuts frizz and keeps your hair smooth longer. It’s different from usual sprays that just coat hair.
The product includes two types of heat guards. They protect your hair during styling without adding weight.
This helps keep your hair light and bouncy. You’ll notice a glassy, sleek finish if used right, which means it’s working as intended.
Don’t use Dream Coat instead of regular heat protectants. This is especially true if your styling tools reach over 400°F. You still need stronger protection for very hot tools. Dream Coat protects well against blow dryers and moderate heat.
It may not be enough alone for very hot flat irons or curling wands. Use extra protection for temperatures above moderate heat. For heavy heat use, a specialized heat protectant with proven heat-shielding ingredients is safer.
Many users miss out on the protective benefits due to application mistakes. You need enough product on damp hair and must activate it by blow drying with tension.
Using the wrong version, original vs. Extra strength, can also affect results. Without heat activation, the protective barrier won’t form properly.
Dream Coat works best when sprayed evenly on damp hair, then blow dried until fully dry. That process activates the heat protection and seals the hair. A full-size bottle costs about $40.
If you apply it right, it lasts through many uses. This makes it a good value for styling products. Skipping steps or applying too little can leave hair feeling unchanged and vulnerable.
How Color Wow Dream Coat Provides Heat Protection

Color Wow Dream Coat works through heat-activated polymers that react when you use warm tools. These polymers form a lightweight, water-resistant shield around each hair strand. This shield controls moisture, prevents frizz, and smooths the hair’s surface for a sleek finish.
The key is in its heat activation. When you blow dry hair with Dream Coat, polymers activate. They start working at about 300°F. This helps protect your hair from heat damage.
This creates a protective layer that helps tame frizz and shield your hair from humidity. The product is designed mainly for use with blow dryers, not direct flat iron heat alone.
Besides heat protection, Dream Coat contains chamomilla extract to protect color-treated hair. It also offers UV protection and helps prevent color fading during heat styling. To get the best results, spray it on damp hair, then blow dry with tension.
The product seals the hair cuticle tightly. It locks in a protective layer. This layer stays safe through blow drying heat.
Apply Dream Coat on damp hair before blow drying. Don’t use it on dry hair. Avoid using it only before flat ironing for best results.
Differences Between Original and Extra Strength Dream Coat Formulas
Extra Strength Dream Coat offers stronger heat protection than the Original version. Their ingredients differ slightly to suit various hair types. You’ll want to pick the one that matches your hair’s texture and condition.
Original Dream Coat Overview
The Original Dream Coat is suitable for fine to medium hair types. It contains vegan keratin and argan oil to smooth and protect hair. This formula activates with heat and helps fight frizz for up to 100 hours.
It’s paraben-free and avoids sulfates, which can strip color and damage hair. You spray it on before blow-drying or flat ironing. This keeps hair sleek without weighing it down.
Extra Strength Formulation Features
Extra Strength Dream Coat is designed for thicker, coarser, or resistant hair. It packs more moisture and frizz-fighting power. This version also relies on heat activation to seal in smoothness and shield hair from damage.
You’ll notice it feels richer due to added ingredients. It’s great if your hair tends to frizz badly or resists styling. Despite the stronger hold, it remains free of parabens and sulfates, protecting your color.
Choosing the Right Formula for Your Hair
Pick Original Dream Coat if your hair is fine or medium and not very damaged. It smooths without heaviness. For thick, curly, or coarse hair, Extra Strength offers better results.
Both let you spray on damp hair before heat styling. If using high heat flat irons or curling irons regularly, layer a dedicated heat protectant first. This adds extra shield against heat damage.
Below is a table comparing the two formulas to help you decide.
| Feature | Original Dream Coat | Extra Strength Dream Coat |
|---|---|---|
| Best for Hair Type | Fine to medium hair | Thick, coarse, resistant hair |
| Key Ingredients | Vegan keratin, argan oil | Improve moisture, vegan keratin, argan oil |
| Heat Activation | Yes, activates with heat | Yes, activates with heat |
| Frizz Control Duration | Up to 100 hours | Up to 100 hours, stronger hold |
| Paraben & Sulfate Status | Paraben-free, sulfate-free | Paraben-free, sulfate-free |
| Use with Other Heat Protectants | Recommended for high heat tools | Recommended for high heat tools |
Both formulas promise long-lasting frizz control but differ in strength. Using Extra Strength means your hair handles heat better but might feel heavier. Original is lighter and easier to manage for thinner hair.
Step-by-Step Guide to Applying Dream Coat for Maximum Heat Protection
To get the best heat protection with Color Wow Dream Coat, use it on damp hair. Towel-dry your hair after shampooing before applying the product. This helps the formula work better and gives a sleek finish.
Use just enough Color Wow Dream Coat for your hair length. Spread the product evenly from roots to ends. Then, style with heat to fully activate the formula.
Preparing Hair Before Application
Wash your hair well with a gentle shampoo like Color Wow Color Security Shampoo. This shampoo won’t strip your hair of moisture. Keeping moisture helps the Dream Coat work better.
Skip heavy conditioners that add buildup. Buildup can stop Color Wow Dream Coat from sticking well. Use a light conditioner or no conditioner for best results.
Lightly towel-dry your hair until it’s damp but not dripping wet. Too much water dilutes the product and lessens its heat protective effect.
Proper Spraying Technique and Quantity
Hold the Dream Coat spray six inches away from hair. Spray about one inch below the part.
This covers the mid-lengths and ends evenly. These areas get the most heat damage.
Use 2-3 pumps of product for medium-length hair. Longer hair may need an extra pump. But don’t oversaturate or hair may feel heavy or sticky.
Spray evenly and avoid layering too close to the roots to prevent buildup at the scalp. Comb through gently to spread the product without disrupting the coating action.
Using Heat to Activate the Formula
Use a blow dryer and round brush to style. Pull your hair gently but firmly to create tension.
Tension helps smooth your hair for a sleek finish. This combo helps Dream Coat form an invisible, hydrophobic matrix that seals the hair cuticle.
Style your hair with heat at around 350°F to 400°F. This temperature range activates Dream Coat without excessive damage from too-high heat. The heat also locks in the smooth, frizz-free finish.
Mistakes That Reduce Effectiveness
Don’t apply other styling products when your hair is wet. Wet products can stop Dream Coat from forming a protective film.
Wait until your hair is dry first. Wait until after heat styling to add serums or oils.
Applying too much product creates buildup, leading to limp or greasy hair instead of sleek shine. Less is more with Dream Coat.
Skipping heat styling means Dream Coat won’t fully activate. So you’ll miss out on both the frizz control and heat protection effects.
- Wash hair with a gentle shampoo that won’t build up residue.
- Towel-dry your hair until it’s damp, not wet.
- Shake Dream Coat bottle well before use.
- Spray 2-3 pumps about one inch below your scalp, focusing on mid-lengths and ends.
- Comb through gently to spread the product evenly.
- Blow-dry hair using a round brush at 350°F to 400°F, creating tension.
- Finish styling with your preferred heat tools as desired.
- Avoid applying other styling products until after hair is fully dry.
How Long Does Color Wow Dream Coat’s Heat Protection Last?
Color Wow Dream Coat’s heat protection usually lasts through 3 to 4 washes. The effect depends on how much heat you use and which shampoo you wash with.
More clarifying shampoos strip away the protection faster. So mild shampoos help keep the shine and frizz control longer.
You don’t lose protection immediately after one wash. Instead, it gradually fades with each wash. So you’ll notice less smoothness after about the third wash.
Air drying still smooths hair. But the full humidity-proof benefits need heat to activate and maintain the coating.
Keeping the effect longer means using the right washing and styling routine. Use gentle shampoos and avoid water that is too hot. Limit daily heat styling between washes to keep smoothness longer.
These steps help your hair stay smooth. Using heat tools daily means you should pair Dream Coat with heat protectant. This combo gives better protection and longer-lasting effects.
Use a sulfate-free shampoo to help Dream Coat’s protection last through more washes.
Comparing Color Wow Dream Coat with Popular Heat Protectants
Color Wow Dream Coat stands out for its strong smoothing effect and water resistance. It’s designed to create a sleek, frizz-free finish after heat styling. However, unlike some heat protectants, it does not contain ingredients that deeply repair damaged hair.
Olaplex, on the other hand, focuses on rebuilding broken bonds inside the hair. It offers heat protection but also strengthens hair from within. This makes Olaplex a good pick if your hair is damaged or you use heat daily.
Here’s a simple comparison of Color Wow Dream Coat and other heat protectants. It covers key features, prices, and best uses. This helps you choose the right product.
| Product | Heat Protection | Styling Benefit | Price (Approx.) | Best Use Case |
|---|---|---|---|---|
| Color Wow Dream Coat | Up to 450°F, water-repellent finish | Smoothes, controls frizz, adds shine | $38 for 3.4 oz | Frizz-prone, humid environments, sleek styles |
| Olaplex No.7 Bonding Oil | Up to 450°F, bonding technology | Strengthens, adds shine, reduces breakage | $28 for 1 oz | Damaged hair, frequent heat styling |
| TRESemmé Thermal Creations Heat Tamer | Up to 450°F | Protects, lightweight, adds softness | $5 for 6 oz | Budget-friendly, everyday heat protection |
| CHI 44 Iron Guard | Up to 450°F | Protects against heat damage, adds shine | $14 for 5.5 oz | Regular heat styling, all hair types |
Dream Coat works best when your main goal is fighting frizz and humidity. It also keeps hair smooth for days if you avoid water. Olaplex suits users needing repair and protection combined.
Cheaper brands like TRESemmé and CHI protect hair from heat well. But they lack extra styling benefits or repair features.
Keep in mind Dream Coat needs a flat iron at 450°F for best results. Some heat protectants advise lower temperatures to avoid damage, so check product instructions. Price reflects what you pay for both styling results and heat protection strength.
Who Should Use Color Wow Dream Coat for Heat Styling?
Color Wow Dream Coat suits all hair types, from fine to thick. It works well on straight, wavy, and curly hair too. People with curls often pick Dream Coat made for curly hair.
It helps control frizz and keep curls in shape. It smooths the hair’s outer layer, which heat styling roughens, especially on colored or dry hair.
Color-treated or chemically processed hair benefits from Dream Coat. It seals the cuticle and protects hair color. It adds shine and reduces moisture loss, which helps hair look healthier after heat styling.
Fine hair gets smoothing without weighing it down. Thick hair becomes easier to manage and less prone to flyaways.
- Use on clean, towel-dried hair before blow-drying or flat ironing.
- Choose the original or extra strength formula based on hair thickness.
- Apply evenly in sections to coat hair without over-saturating.
- Follow with a heat styling tool set to 350, 450°F for best results.
- Pair with other products for extra moisture if your hair is very dry.
- Avoid using alone if hair is heavily damaged; add a deep conditioner first.
- Skip if you want more volume since Dream Coat creates a sleek, flat finish.
People with badly damaged hair should use Dream Coat after deep conditioning, not alone. It won’t repair damage but protects hair from heat when styled afterward. To get volume or texture, use Dream Coat with volumizers.
You can also apply it only on mid-lengths and ends. The result is smooth, shiny hair that handles heat styling better and keeps color longer.
Common Mistakes and How to Fix Them When Using Dream Coat
Many users make simple mistakes with Dream Coat that cut its heat protection power. Fixing these issues helps your hair become smoother and stronger. It also stops greasy buildup.
Plus, it protects hair better against heat damage. Small changes in how you use it can improve your results a lot.
Using Too Little Product
Using too little Dream Coat leaves hair open to heat damage. You miss the chance for a strong coating effect.
Color Wow suggests about a coin-sized amount per application. Spread it evenly on each hair section to coat strands fully.
For thicker or longer hair, you’ll want to increase the amount slightly, around 1.5 to 2 coin-sized portions. Not enough product means the heat won’t seal the hair cuticle completely. You’ll get less shine and more frizz.
Make sure to massage the serum well through your hair. This helps the product reach all areas instead of just sitting on top. When done right, hair feels silky and looks glossy after heat styling.
Applying on Soaking Wet Hair
Many users apply Dream Coat when their hair is too wet. That dilutes it and stops it from bonding well.
Dream Coat works best on towel-dried hair, not dripping wet. Hair should feel damp but without excess water pooling on strands.
Start by blotting your hair gently with a towel. Avoid rubbing, which can damage hair strands. Then apply Dream Coat evenly.
Rinsing Dream Coat out after shampooing helps prevent buildup. It also keeps hair feeling light.
Applying on soaking wet hair weakens Dream Coat’s sealing effect and can cause greasy look.
Skipping Heat Activation
Dream Coat’s heat protection works only when you use heat tools. This includes flat irons or other heat styling tools. Skipping the heat step means the formula won’t lock the cuticle.
The protection won’t work as it should. Hair will feel less smooth and frizz may return quickly.
Use a straightener set between 350°F and 410°F, as recommended by Color Wow. Slow, measured passes over small hair sections give the best results.
You can repeat the flat iron step 2 to 3 times per section. But don’t overdo it to avoid damage.
This heat activation creates a water-repelling shield that holds the hair sleek and shiny longer. Without heat, Dream Coat acts more like a regular conditioning serum.
Combining with Heavy Products Incorrectly
Using Dream Coat with thick oils or creams can make hair greasy. It also weighs the hair down.
This reduces smoothness and shine instead of improving it. To avoid this, use Dream Coat alone or with very light styling products.
Apply Dream Coat after washing and rinsing your hair thoroughly. Wait a few minutes after any shampoo or treatment before using it.
Then use a light leave-in conditioner or a heat protectant spray if needed. But avoid layering heavy creams or butters.
This approach stops product buildup that weighs hair down and causes a limp, greasy look.
- Use a coin-sized amount or more for thick hair
- Apply to towel-dried hair, not soaking wet
- Flat iron hair after application to lock in protection
- Keep straightener temperature between 350, 410°F
- Avoid mixing with heavy creams or oils before Dream Coat
- Rinse shampoo thoroughly and dry before applying
- Don’t skip the flat iron step for best sealing
Step-by-Step Action Plan for Using Color Wow Dream Coat
Follow these steps to get the best heat protection from Color Wow Dream Coat. Watch your hair to see the shine and smoothness improve with each step.
- Before washing: Start with dry hair to make sure Dream Coat locks in moisture. You’ll feel softer hair after drying.
- After shampooing: Towel-dry your hair gently. Spray Dream Coat evenly from roots to ends and comb through. Hair should feel silky, not sticky.
- Before blow-drying: Let hair air dry about 70% first. Then apply a blow dryer on medium heat. Notice your hair stays smooth and frizz-free.
- Before flat ironing: Use the highest heat your hair safely tolerates (up to 450°F). Run the flat iron quickly without multiple passes. Your hair will look sleek without damage.
- Daily touch-ups: Use a small amount on dry hair to tame flyaways. Shine should return with minimal product build-up.
- Every 5, 7 washes: Reapply Dream Coat fully to maintain protection. Observe your hair keeps its smooth texture longer.
- After heat styling: Use a light conditioner or serum to lock moisture in. Your hair will feel soft and hydrated instead of dry.
Frequently Asked Questions
Is Colour Wow a Good Heat Protectant?
Colour Wow Dream Coat offers heat protection but isn’t a full heat shield. It works best as a smoothing treatment paired with other heat protectants for safer styling.
Is the Color Wow Dream Coat Extra Strength a Heat Protectant?
Yes, the extra strength version still provides heat protection but focuses more on smoothing and moisture. Use it before blow drying for best results.
What Is the Highest Rated Heat Protectant?
The highest rated heat protectants often have ingredients like silicones or polymers. Products vary by hair type and styling tools. So pick one that suits your needs.
Which Is Better, Olaplex or WoW?
Olaplex repairs damaged bonds, while Color Wow controls frizz and adds shine. Use Olaplex for damage and WoW for smooth, sleek finishes.
Can Color Wow Dream Coat Be Used on Dry Hair for Heat Protection?
No, apply Color Wow Dream Coat to damp hair before heat styling. It activates with heat and won’t work well on dry hair.
Does Color Wow Dream Coat Protect Hair from Flat Iron Heat?
It offers some protection but isn’t a full flat iron shield. Use it with a dedicated heat protectant for better results.
The Bottom Line
Color Wow Dream Coat provides strong heat protection but is best as part of a routine. Start with a good application and use heat tools carefully for smooth results. Try it on your next styling day.
Notice the change in hair feel. See how your hair looks different too.
