how to curl hair with dyson airwrap

How to Curl Hair with Dyson Airwrap: Simple Steps for Long-Lasting Curls

Learning how to curl hair with Dyson Airwrap can give you lasting, smooth curls. Use hair that’s about 80% dry for the best results. Curling damp hair locks in the shape better than dry or wet hair.

Start by towel-drying your hair until it’s just damp, not dripping wet. The Airwrap dries and styles at once, so your curls stay bouncy all day. Avoid using it on completely dry hair because the curls won’t hold well.

The Dyson Airwrap works by using controlled airflow under 150 degrees. This lower heat protects your hair while shaping curls quickly. Make sure not to pull the tool away while it’s running to keep curls intact.

Section your hair into small parts for even curling. Hold the Airwrap close to each section and let it wrap around naturally. Finish by letting curls cool before touching them for longer hold.

Key Takeaways

  • Towel-dry hair to about 80% before styling for lasting curls.
  • Use the right barrel size to match your curl type and size.
  • Hold hair gently against the barrel as it wraps for even curls.
  • Curl small sections for tighter, more defined curls.
  • Use the cool shot to set curls and increase their hold.
  • Pin curls after styling to help them cool and last longer.

How to Curl Hair with Dyson Airwrap Step-by-Step

How to Curl Hair with Dyson Airwrap Step-by-Step

Start curling your hair when it’s about 80% dry. The Dyson Airwrap uses airflow to wrap hair around the barrel. Holding hair too long can harm the curl shape.

Releasing it too fast might cause frizz. Both can ruin your style. Let the Airwrap do most of the work to create soft, lasting curls.

  1. Section your hair into small, manageable parts. Smaller sections curl better and hold longer.
  2. Attach the curling barrel to your Dyson Airwrap. Use the 1.2-inch barrel for tight curls or the larger one for waves.
  3. Turn on the Airwrap and hold a section of hair near the barrel.
  4. Place hair near the barrel so airflow wraps it. This uses the Coanda effect automatically. It helps form smooth curls.
  5. Hold the hair wrapped around the barrel for about 10 to 15 seconds. This time lets the curl set without overheating the hair.
  6. Move the Airwrap gently back and forth if you want tighter curls and more tension.
  7. Press the cool shot button on the Airwrap. This locks the curl in place. Then you can safely release it.
  8. Carefully release the curl by sliding the barrel out without pulling or twisting. This avoids frizz and damage.

Hold each hair section on the barrel just enough. Let the curl form and set well. Don’t hold it too long.

More than 15 seconds risks heat stress on your hair fibers. Using the cool shot is key. It helps the curl last longer and keeps your hair shiny.

For looser curls, wrap larger sections and hold briefly. For tight curls, wrap thin sections and hold slightly longer.

Releasing curls gently after cooling keeps them smooth and reduces frizz. Avoid pulling the barrel harshly or letting hair slide off prematurely.

Preparing Your Hair for Dyson Airwrap Curls

Preparing Your Hair for Dyson Airwrap Curls

Clean and damp hair is best before curling with the Dyson Airwrap. Avoid soaking wet or fully dry hair. Damp hair curls more easily and holds style better.

Use the Airwrap’s dryer or a regular blow dryer to dry hair. Stop when it’s about 80 to 90 percent dry. This dryness level helps curls form well.

Put on heat protectant and styling products before drying your hair. This protects your hair from heat damage. It also helps curls last longer.

Washing and Conditioning Tips

Start with freshly washed and conditioned hair for the best Airwrap curls. Use a gentle shampoo that won’t strip your hair of natural oils but leaves it clean. Follow with a conditioner, focusing on the mid-lengths to ends to avoid weighing down your roots.

Rinse your hair thoroughly to avoid product buildup that could make curls limp. After washing, gently towel-dry your hair without rubbing aggressively. This prevents frizz and breakage before you start styling.

Using Heat Protectants and Styling Products

Apply a heat protectant spray or serum to damp hair before drying. It shields your strands from any heat damage, even though the Airwrap stays under 150°F. Choose products that give your hair hold.

Light mousse or volumizing spray works well. These keep curls in place longer.

Spread the product evenly through the hair. Concentrate on the lengths and ends. Don’t put product on the scalp.

This preparation creates a smooth base that the Airwrap curls can grip without slipping. Styling products also reduce frizz and add shine.

Don’t skip the heat protectant; even low heat can cause damage over time.

Achieving the Right Moisture Level

The Airwrap works best when your hair is damp, about 80 to 90 percent dry. Hair that’s too wet won’t curl properly. Moisture weight pulls curls down.

Wait until hair is drier before curling. Too dry, and the Airwrap won’t create enough of the curl shape using airflow.

After washing, use the Airwrap’s pre-styling dryer or a blow dryer. Set the heat to medium. Start drying hair evenly before curling.

Stop drying once the hair is still slightly cool to the touch but no longer dripping. Smaller hair sections will dry faster and style more evenly.

  • Use the Airwrap’s dryer attachment to rough dry hair first
  • Stop drying when hair is 80-90% dry, still slightly damp
  • Section hair into small parts before curling for even heat
  • Apply heat protectant and styling products on damp hair
  • Avoid curling soaking wet or completely dry hair

Choosing the Right Dyson Airwrap Barrel for Desired Curls

The barrel size you choose on the Dyson Airwrap shapes your curls. The 40mm barrel creates loose waves, while the 30mm barrel produces classic curls. For tighter ringlets, a 20mm barrel is best, though it is often sold separately.

Hair length influences which barrels work best. Your hair is longer than your collarbone? Use the 40mm barrel for softer curls.

Hair shorter than collarbone? The 30mm barrel usually holds curls better. You can switch barrels to match how tight or loose you want the curls.

Barrel Size Curl Type Recommended Hair Length
20mm (sold separately) Tight ringlets All lengths, but better for shorter hair
30mm Classic curls Shoulder to collarbone-length hair
40mm Loose waves Collarbone length to long hair

For shorter hair, wrap smaller sections around the barrel to give curls better shape. Long hair sections take more time to curl. Hold your hair around the barrel for about 15 seconds.

This helps dry the curl well. Letting airwraps dry the hair locks in the curl without using extreme heat.

Alternating curl direction makes your style look natural. Wrap one section toward your face and the next one away from your face. Move the barrel back and forth while curling.

This stops curls from clumping together. It also creates a soft, full look.

Start with clean, damp hair and section it off in about 1-inch portions. Hold each section near the barrel so air gently wraps the hair.

You can guide hair by hand if you want looser curls. Use the cool shot button to set curls and avoid frizz.

Optimizing Dyson Airwrap Settings for Perfect Curls

The best settings on the Dyson Airwrap for curls are high heat and high airflow. These provide strong, defined curls, especially for fine, thick, or straight hair. Adjust hold times and use the cool shot properly to make curls last longer.

Selecting Heat and Airflow Levels

Set the Airwrap to high heat and high airflow before touching your hair. This combination helps form firm curls quickly while protecting your hair. It’s ideal for curling most hair types, including fine, thick, and straight hair.

Using low heat and airflow suits fragile or damaged hair better. This can weaken how well curls hold their shape. You might get softer, less defined curls this way.

Avoid medium or low heat if you want long-lasting curls. Heat activates the Airwrap’s styling power, so higher levels deliver better results.

  • Always start with high heat and airflow for effective curls
  • Fine, thick, or straight hair needs higher settings
  • Fragile or damaged hair may use lower heat to avoid stress
  • Never apply heat before switching the Airwrap on
  • Check the temperature matches your hair’s tolerance

Keeping heat and airflow high speeds up drying time so curls set well. It also helps the Airwrap tool spin hair around the barrel smoothly.

Adjusting Hold Times per Hair Type

Hold your hair on the barrel until it’s mostly dry and shaped. Fine or slippery hair needs extra time wrapped up and pinned. Coil each curl back and clip it to cool fully for stronger hold.

Thick hair takes more time to dry around the barrel. It usually holds curls well once it’s dry. Expect to spend a little extra time styling it.

For fine or thin hair, let curls cool completely pinned up after curling. This step boosts curl life and bounce.

Do not pull the Airwrap away from hair while airflow is on. Wait for the Airwrap to turn off completely.

Then pull the barrel out slowly. This helps keep the curls from falling apart.

Using the Cool Shot to Set Curls

Activate the cool shot by sliding the power switch to the top and holding the button. Use 5 to 15 seconds of cold air depending on your hair type and curl style. This locks the curl in place.

Apply the cool shot right after curling without turning the Airwrap off first. Hold the curl with cold air to quickly dry the hair in its shaped form. This process helps prevent curls from loosening too soon.

  • Hold cold shot button for about 5 to 10 seconds per curl
  • Use longer cool shot on thick or hard-to-set hair
  • Cool shot is safest even if held too long
  • Release the curl only after the Airwrap is off
  • Pin curls while cooling for extra hold

Following these steps protects your hair from damage while keeping curls sharp. The Airwrap’s cool shot finishes styling safely, helping curls last throughout your day.

Using the Dyson Airwrap Cool Shot to Lock Curls

Using the Dyson Airwrap cool shot helps your curls hold their shape longer. Hair sets better as it cools, so spraying cool air locks the curl quickly. Without it, warm curls stretch out and fall flat faster under their weight.

Hold each curl around the barrel for about 10 seconds before switching to the cool shot. This gives the hair time to heat and form the shape.

Then, apply the cool shot for 5 to 8 seconds to freeze the curl in place. This method reduces the risk of curls loosening too soon.

If your curls fall out quickly, try using the cool shot on all curls, not just some. Also, make sure your roots are fully dry before curling. Damp roots weigh down hair, causing curls to droop and lose bounce.

  1. Wrap a small section of hair around the curling barrel.
  2. Hold the hair on the barrel for 10 seconds to heat it thoroughly.
  3. Switch to the cool shot button, aiming the airflow at the curl.
  4. Hold the cool shot for 5 to 8 seconds to set the curl.
  5. Gently release the curl from the barrel without pulling it.
  6. Repeat for all sections, applying the cool shot on each.
  7. Use the cool shot on roots or bangs to maximize curl hold in tricky areas.

Don’t skip the cool shot even if you’re in a hurry. It’s the key step for lasting curls.

Styling Products to improve and Protect Airwrap Curls

Start by applying a heat protectant spray to damp hair before using the Dyson Airwrap. This shields your hair strands from heat damage and helps curls stay smooth and shiny. Use a light mist evenly over your hair, focusing on ends and mid-lengths for best protection.

During curling, avoid heavy products that block airflow or weigh curls down. A small amount of styling mousse can add grip, but don’t overdo it.

The Airwrap’s airflow gently shapes curls. So product buildup can reduce its curling power and create frizz.

After curling, lock in your style with a flexible hold hairspray. It keeps curls bouncy and lasts longer without making hair stiff or crunchy. Use 6 to 8 spritzes from 8 to 12 inches away.

Spray evenly over your curls. Then gently tousle curls with fingers for a natural look.

  • Before curling: Apply a light heat protectant spray on damp hair
  • Optional: Use a small amount of mousse for extra hold before curling
  • Do not apply heavy oils or creams before or during curling
  • After curling: Use a flexible light hold hairspray
  • For extra shine, finish with a light serum applied sparingly on ends
  • Use dry shampoo on roots to refresh curls and add volume the next day

Preparing your hair with these products protects it from heat stress while boosting curl shape. Choose products labeled “lightweight” or “non-greasy” to avoid weighing curls down. Heavy creams and oils can leak onto the Airwrap.

This might block its airflow curling method. As a result, curls may turn out limp.

For better curl hold, let curls cool completely before touching or brushing. Cooling sets the curls so they last longer, sometimes up to two days. Using dry shampoo on day two revives volume and helps maintain bounce, especially for thinner hair.

Common Mistakes When Curling with the Dyson Airwrap

One common mistake when curling with the Dyson Airwrap is skipping the right prep. Your curls won’t hold well if your hair is very dry or oily. Using a light mousse before drying helps curls last longer by giving your hair grip.

Not wrapping the hair section correctly around the barrel also causes poor curls. Wrapping unevenly or overloading the barrel leads to loose, uneven curls. Take small, even sections of hair about one inch wide for consistent results.

Here’s a list of frequent errors and how to fix them for stronger, prettier curls:

  • Using large hair sections, break into smaller pieces around one inch wide.
  • Skipping heat protectant or mousse, apply both before curling for hold and protection.
  • Don’t hold the Airwrap on hair too briefly. Keep wrapping for 10 to 15 seconds.
  • Not cooling curls, use the cool shot immediately after curling to lock shape.
  • Don’t set the temperature too low or too high. Use medium heat for fine hair. Use higher heat for thick hair.
  • Ignoring hair texture variations, fine hair needs smaller barrels and gentler heat.
  • Over-tugging curls, let the Airwrap do the work and avoid pulling hair forcibly.

Many users worry about curls falling out quickly. Holding sections longer on the barrel helps. Hold each hair section for 12 to 15 seconds.

Then use the cool shot for 5 seconds. Avoid touching curls too soon, because fingers break them apart, causing frizz and loss of shape.

Fine hair curls better with the 20mm barrel, which creates tighter curls that last longer. Use medium heat to avoid damage. For thick or curly hair, use higher heat and larger sections.

Move the Airwrap slowly. Thick hair usually takes longer to heat, so patience pays off.

Adjusting Your Curling Technique for Different Hair Types

Curling hair with the Dyson Airwrap needs small changes depending on your hair type. Fine, thick, and curly hair all react differently to heat and airflow. Matching your technique and settings can help your curls last longer and look better.

Fine Hair Curling Tips and Products

Fine hair curls fastest but can be fragile. Use the lowest heat setting and avoid over-drying on the Airwrap to protect your strands. Wrap smaller sections for more defined curls without stressing your hair.

Choose lightweight, heat-protective sprays to prevent damage and avoid heavy products. Mousse or a light curl cream helps hold the curl without weighing fine hair down. Let curls cool fully before touching to lock in the shape.

Thick or Coarse Hair Adjustments

Thick hair needs more time under heat and a higher Airwrap setting for lasting curls. Use medium to high heat to shape curls well, but keep the airflow steady. Work with slightly larger hair sections to manage volume evenly.

Heavier holding products like curl creams or styling gels keep curls intact longer on thick hair. Blow-dry curls with the cool shot after styling to seal them. You might spend 5 to 10 extra minutes curling thick hair for the best effect.

Curly or Textured Hair Preparation

Start with damp, detangled hair. Use the Airwrap on a low heat to improve natural curls, not fight them. Avoid high heat to prevent frizz and keep curls soft.

Apply curl-improving cream or leave-in conditioner before styling to boost definition. Let curls cool fully before touching or brushing. This helps them hold their shape and reduces unwanted frizz.

Don’t rush cooling your curls before touching; it helps curls last much longer.

Step-by-Step Action Plan for Perfect Dyson Airwrap Curls

Follow these clear steps today for great curls with your Dyson Airwrap. Each step helps you check if you’re doing it right.

  1. Before You Start: Wash and towel-dry hair until damp, not dripping. This helps the Airwrap grip and curl your hair well.
  2. First 5 Minutes: Attach your chosen barrel and set the heat to medium. Curl a small section to test if the barrel size suits your desired curl tightness.
  3. Next 10 Minutes: Slowly wrap hair around the barrel without forcing. Hold for about 10 seconds, then release and check if the curl looks even and smooth.
  4. After Curling Each Section: Use the cool shot to lock the curl. The curl should hold shape even after you touch it gently.
  5. After All Hair Is Curled: Apply a light styling spray to protect and set curls. Check curls for bounce and softness without stiffness.
  6. Within 15 Minutes: Gently separate curls with fingers for a natural look. Make sure curls keep their shape and don’t fall flat.
  7. After 1 Hour: Avoid touching your hair too much to keep curls fresh longer. Your curls should last through the day without frizz.

Frequently Asked Questions

How Do I Prevent My Curls from Falling Out Too Quickly?

Use the cool shot feature to lock curls in place. Also, avoid touching or brushing curls until they fully set to keep them bouncy longer.

Can I Use the Dyson Airwrap on Dry Hair to Create Curls?

It’s best to use the Airwrap on hair that’s about 80% damp. Dry hair may not curl as well and can stress the hair.

How Do I Avoid Tangling My Hair in the Dyson Airwrap Barrel?

Section your hair into small, manageable pieces before curling. Keep the barrel moving gently to prevent hair from wrapping too tightly.

Is It Necessary to Use Styling Products Before Curling with the Dyson Airwrap?

Using a light heat protectant or curl product is optional. It can help protect your hair from heat damage. These products can also make your curls last longer.

Can I Create Different Curl Sizes with the Same Dyson Airwrap Barrel?

Yes, you can change curl size by wrapping more or less hair. Holding the Airwrap longer makes tighter curls.

Adjust these to get the curl style you want. Smaller sections make tighter curls.

How Do I Clean and Maintain the Dyson Airwrap Barrel for Best Performance?

Regularly remove hair buildup and clean the filter to keep airflow strong. Wipe the barrel with a damp cloth to avoid product residue.

Final Thoughts

You can create amazing curls with patience and the right technique. Keep practicing these steps for better curls each time. Start by curling just one section today and build from there.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *