what happens to brown hair with purple shampoo

What Happens to Brown Hair with Purple Shampoo: A Complete Guide That Works

What happens to brown hair with purple shampoo depends on how light it is. Purple shampoo targets yellow and gold tones.

Dark natural brown hair won’t change much. Lightened brown hair with highlights or balayage shows less brassiness.

Your hair looks more balanced after using purple shampoo. Use it only on hair lightened to level 8 or higher. This helps show better results.

Apply shampoo to damp hair and leave it on 3 to 5 minutes. That gives pigments time to cancel yellow tones.

Don’t leave shampoo on too long if your hair is damaged. It can turn slightly purple.

Dark brown hair below level 7 benefits more from blue shampoo. Blue shampoo fights unwanted brassy tones better.

Wait 48 to 72 hours after bleaching before starting purple shampoo. This gives your hair time to absorb the pigment well.

Key Takeaways

  • Purple shampoo works best on lightened brown hair, not natural dark brown.
  • Leave purple shampoo on for 3 to 5 minutes to neutralize brassy tones.
  • Avoid using purple shampoo for 48 to 72 hours after bleaching. This wait helps protect your hair.
  • Use a lower violet pigment formula for dark or virgin brown hair.
  • Shorten shampoo time if your hair is porous or damaged to avoid purple tint.
  • Choose blue shampoo for brown hair darker than level 7 to reduce brassiness.

What Happens to Brown Hair When Using Purple Shampoo?

What Happens to Brown Hair When Using Purple Shampoo?

Purple shampoo doesn’t lighten brown hair or dye it purple. It only tones the hair by neutralizing unwanted brassiness and yellow tones. For natural brown hair, the effect is hardly seen.

Purple shampoo mainly works on lighter or bleached parts. It doesn’t change darker brown much.

Brown hair with highlights or balayage can see less brassiness. Purple shampoo cuts yellow and gold shades by about 24%. Using it on all brown hair shows less change.

Purple shampoo may tint dark brown hair if left too long. A slight purple or blue shade might appear on your hair. This happens more when you use it too often.

This happens because the violet pigments sit on the hair surface instead of fully absorbing. Rinse purple shampoo in one to three minutes to avoid tint.

Use it only once or twice a week on highlights. This helps keep your brown hair color natural.

On lightened brown locks, purple shampoo helps maintain a cooler tone between salon visits. It refreshes your color without chemicals or bleach, making strands look brighter and less brassy. For untreated brown hair, try masks with color or blue shampoo.

These can reduce orange or copper tones better than purple shampoo. They refresh your natural shade more gently.

When purple shampoo is used properly, lightened brown hair appears more vibrant and cooler. The color stays fresh longer, and brassiness fades.

But on virgin brown hair, the results will be subtle or not visible at all. Use it mainly if your brown has some blonde or light pieces to get worthwhile results.

Why Purple Shampoo Works Mainly on Lightened Brown Hair

Why Purple Shampoo Works Mainly on Lightened Brown Hair

Purple shampoo works best on lightened brown hair because it targets yellow tones. When hair is lightened, its natural pigment lifts, revealing warm yellow hues.

Purple sits opposite yellow on the color wheel. So its violet pigments cancel out those yellowish shades.

This shampoo mainly helps cool down brassiness, which is the unwanted warm colour in hair. Brassiness happens when hair oxidizes or fades, showing yellow or gold parts. Purple shampoo deposits violet pigment right on those lighter, brassy highlights or balayage sections.

Brown hair with orange or copper tones usually needs blue shampoo instead. Blue pigments fight orange-red warmth more effectively than purple shampoos.

Purple shampoo can reduce mild orange hues. It is not the best choice for heavy copper tones.

For lightened or highlighted brown hair, use purple shampoo only on those sections. Focus on areas lifted to caramel or ash levels, as they tend to turn brassy faster.

Using purple shampoo too often can leave your hair dull. Applying it on unlightened dark hair may cause a slight purple tint.

Keep your purple shampoo use to once or twice a week to maintain cool highlights. Leave it on for about 3 to 5 minutes to neutralize brassiness without drying your hair. Overusing it can make hair look gray or unnatural in tone.

Only use purple shampoo on lightened or highlighted parts to avoid dulling your natural brown color.

Lightened brown hair usually shows brassiness as yellow rather than orange. So purple shampoo is ideal. Orange or copper reds need stronger neutralizing.

Try using blue shampoo instead. Use the right shampoo for your undertone to maintain fresh, natural-looking color after coloring or highlights.

How to Properly Use Purple Shampoo on Brown Hair

Use purple shampoo carefully on brown hair, focusing on mid-lengths and ends. Keep it on for 3 to 5 minutes, then rinse well. Limit use to about once a week to avoid unwanted tones and dryness.

Step 1: Prep Your Hair Before Shampooing

Rinse your brown hair with warm water to open the cuticles. This helps the purple shampoo work better on areas prone to brassiness. Avoid starting on dry hair to ensure even application.

You want your hair damp before applying the shampoo. It makes spreading the shampoo easier and stops over-toning in any spot.

Step 2: Applying Purple Shampoo to Mid-Lengths and Ends

Focus the shampoo on mid-lengths and ends where brassiness usually shows up. Skip the roots to prevent your scalp from drying out or discoloring. Use about a quarter-sized amount per section for even coverage.

Apply the shampoo with your fingers or a wide-tooth comb. Gently massage to spread it without rubbing too hard. Don’t pile it on thickly; a thin layer works best.

Step 3: Timing the Leave-In Period Based on Hair Shade

Leave the shampoo in for 3 to 5 minutes depending on your hair’s lightness. Lighter brown or highlighted hair can handle closer to 5 minutes. Darker, natural brown hair should stick to 3 minutes to avoid purple tones.

Watch your hair color as you go. Rinse sooner next time when your hair looks too ashy or purple. It’s better to start with less time and adjust.

Step 4: Rinsing and Follow-Up Conditioning

Rinse your hair thoroughly with cool water to close the cuticles after shampooing. Cool water locks in the toner and helps your hair shine. Follow with a moisturizing conditioner to avoid dryness and keep hair soft.

Apply conditioner mainly to mid-lengths and ends. Don’t forget this step; purple shampoo can be drying without moisture afterward.

Step 5: Suggested Frequency and Maintenance Tips

Use purple shampoo once a week for lightened or highlighted brown hair. You can use purple shampoo twice a week with porous hair or frequent washing. Natural brown hair usually doesn’t need purple shampoo at all.

Space out purple shampoo days with regular shampoo days to avoid over-toning. Skip a wash or use clarifying shampoo before your next purple shampoo day.

  1. Rinse hair with warm water until damp.
  2. Apply a quarter-sized amount of purple shampoo to mid-lengths and ends.
  3. Gently massage shampoo without touching the roots.
  4. Leave shampoo on for 3 to 5 minutes, depending on hair lightness.
  5. Rinse thoroughly with cool water to close cuticles.
  6. Apply conditioner from mid-lengths to ends and rinse out.
  7. Repeat once a week or up to twice for very lightened brown hair.
  8. Adjust timing and frequency based on your hair’s reaction.

Choosing Between Purple and Blue Shampoo for Brown Hair

Blue shampoo works best for brunettes with dark brown hair and orange undertones. Purple shampoo targets yellow tones, which show more on lighter brown shades. Choosing the right one depends on the brassiness in your hair and its base color.

Blue shampoo has higher pigment concentration than purple shampoo. It cancels out stronger orange and red tones.

Purple shampoo uses violet pigment aimed at softer yellow tones. This makes purple ideal for lightened or light brunette hair with mild brassiness.

Shampoo Type Best For Hair Tone Targets Brassiness Pigment Color Effectiveness Level
Blue Shampoo Darker Browns (level 5 to 6) Orange and red undertones Blue pigment Strong on heavy brassiness
Purple Shampoo Light Brunettes (level 7 or lighter) Yellow undertones Violet pigment Moderate on subtle brassiness
Both Various brown shades Brassy warmth Blue or violet pigment Needs toner if strong brassiness remains

Use blue shampoo when your brown is darker than level 7. It clears orange tones better than purple shampoo.

For lighter brunette hair, purple shampoo gently reduces yellowish brassy tones. Sometimes, toners are necessary if shampoo alone can’t fix the problem.

Applying blue shampoo once or twice a week helps control heavy brassiness. Using purple shampoo more often suits mild brassiness or maintained lightened brown hair.

Avoid leaving shampoo on too long; 3 to 5 minutes is usually enough. Overuse can cause an unwanted blue or purple tint, especially on darker hair.

Common Mistakes to Avoid When Using Purple Shampoo on Brown Hair

Purple shampoo is meant to neutralize yellow tones in brown hair. Leaving it on too long, especially over five minutes, can cause a light purple tint. That’s more common when your hair is porous or has lightened parts like highlights.

Applying purple shampoo on your roots often leads to uneven color. Your roots are usually darker and less porous.

So the shampoo won’t tone them the same way. This can create patchy or dull spots instead of a balanced look.

Not all purple shampoos suit brown hair. Some are made for blonde shades and might be too strong. Using the wrong formula can dry out your hair.

It might also leave a grayish or purplish cast. Be careful which formula you pick.

  • Don’t leave purple shampoo on longer than 3 to 5 minutes on brown hair.
  • Avoid applying it directly on roots to prevent uneven toning.
  • Choose a formula designed for brown or darker hair shades.
  • Use purple shampoo only once or twice a week, not daily.
  • Rinse thoroughly to remove all the shampoo and prevent buildup.
  • Condition your hair after to avoid dryness or brittleness.

Daily use can make brown hair look dull or cause purple tones to build up. It strips natural oils and pigments, making hair dry and flat. Purple shampoo works best as a treatment between regular shampoos, not a daily cleanser.

Test purple shampoo on a small section before full use to avoid unwanted tones.

Cut back on how long you leave it on when you see unwanted purple shades. Also, switch to a lighter formula or one made especially for brown hair. Always follow the instructions and adjust use based on your hair’s condition.

How Hair Type and Condition Affect Purple Shampoo Results

Porous or damaged brown hair soaks up purple shampoo differently. Hair with high porosity has open cuticles, making it absorb the purple pigment more quickly. That can lead to an unwanted lilac tint if you leave the shampoo on too long.

Dry or brittle brown hair needs gentler care when using purple shampoo. Choose formulas with lower percentages of violet pigment, around 0.5% to 1.5%, to avoid drying out the strands more. Using a strong formula or leaving shampoo too long can damage hair.

This can make hair feel rough and look patchy. Be careful with the timing to avoid brittleness.

You can test how your hair reacts safely by doing a strand test first. Take a small section of hair and apply the shampoo for one minute. Rinse it out and check the color.

You might want to try the full shampoo application soon. Start with a short time to test the tone. Adjust as needed based on how your hair looks.

  • Use a formula with 0.5% violet pigment for virgin or dark brown hair
  • Try a stronger 1.5% violet formula only on lightly colored or low-porosity hair
  • Shorten contact time to 1 to 3 minutes for porous or damaged hair
  • Use purple shampoo once every week or every other time you wash. This helps keep your hair tone fresh without overdoing it. Stick to this routine for best results.
  • Leave on 3 to 10 minutes when hair feels dry. But watch for purple tinting
  • Do a strand test before full use to avoid surprise tones

The natural darkness of your brown hair affects how much the purple pigment shows. Dark virgin brown usually needs the softest purple shampoo and shortest times. Light brown or highlighted hair can take more pigment and longer times without looking strange.

Be patient and adjust your routine based on the results. Too much purple shampoo or leaving it on too long causes an over-toned or dull look. Proper timing and the right product are key to keeping your brown hair fresh and balanced.

How to Fix Purple or Unwanted Tones After Using Purple Shampoo

Purple or grayish tones can show up on brown hair after using purple shampoo. You can fix this by washing out the excess pigment and restoring warm tones. Follow clear steps to reverse purple staining and bring back your natural brown color.

Step 1: Use a Clarifying or Detox Shampoo

A clarifying shampoo removes buildup, including extra purple dye. It’s stronger than regular shampoos and helps strip unwanted color quickly. Use one designed for color-treated hair to avoid drying out your brown locks.

Wash your hair once or twice with the clarifying shampoo. Let it sit for 3 to 5 minutes before rinsing to lift purple tones better. Don’t shampoo more than twice in one session, or hair could dry and frizz.

Step 2: Perform a Two-Day Wash Break

Pause washing your hair for 48 hours to let oils rebuild. Natural scalp oils help protect hair and even out color tones. Washing hair too soon can strip moisture and cause uneven fading of purple stain.

During this break, avoid styling with heat or chemicals that stress hair. Use gentle brush strokes to detangle carefully without breaking hair. Two days is enough for your hair to stabilize after deep cleansing.

Step 3: Apply a Copper or Warm-Toned Conditioner

A warm-toned conditioner adds richness back to brown hair. It counteracts cool purple or gray shades with subtle reds or golds. Choose a conditioner labeled for brown hair color or formulas with copper and caramel tones.

Apply the conditioner for 5 to 10 minutes once or twice a week. Let it sit longer if your hair feels dry. Using a hair mask with warm pigments can offer deeper color correction and moisture.

Step 4: Avoid Purple Shampoo Until Color Normalizes

Hold off on purple shampoo while your brown hair recovers. Using it again too soon can darken or dull hair further. Give your hair a few weeks of gentle care before reintroducing purple shampoo slowly.

After your hair looks warm and even, wait to use purple shampoo. Use purple shampoo once every 1 to 2 weeks. Don’t use it more often than that.

Use less product, leave it on only for 1 to 2 minutes, and rinse thoroughly. This helps prevent repeating unwanted tones.

  1. Wash hair with a clarifying shampoo, letting it sit for 3, 5 minutes.
  2. Rinse well and avoid heat styling for the next two days.
  3. Skip shampooing for a two-day wash break to restore scalp oils.
  4. Apply a copper or warm-toned conditioner for 5 to 10 minutes after the break.
  5. Use a warm pigment hair mask once or twice a week if needed.
  6. Wait several weeks before using purple shampoo again on brown hair.
  7. When restarting, use the purple shampoo sparingly and rinse quickly.

Deciding If Purple Shampoo Is Right for Your Brown Hair

Purple shampoo works best on brown hair that shows yellow tones or has been lightened. Your hair might not need purple shampoo if it’s natural and not brassy. Check your hair’s shade, undertones, and condition before deciding.

Check Your Hair Color Level and Undertones

Look closely at your brown hair in natural light. Identify if it leans warm, cool, or neutral.

Purple shampoo targets yellow undertones because purple is opposite yellow on the color wheel. Cooler brown shades can benefit more from it than warm or neutral shades.

Warm or orange undertones respond better to blue shampoos, which neutralize orange or red. Your brown hair’s shade matters. Lighter, more lifted hair shows yellow tones more.

Assess the Presence of Unwanted Yellow or Orange Tones

Brassiness in brown hair often looks like unwanted warmth. Decide if you see more yellow hues or orange/red warmth. Use this quick way to check:

  • Hold a strand of hair under daylight or bright white light
  • Look for yellow patches or an overall yellow tint
  • Notice if the hair looks coppery or closer to orange
  • Check if the hair feels dull or washed out
  • Consider how long since your last color treatment or sun exposure

Yellow tones signal purple shampoo can help. Orange tones suggest blue shampoo might be more effective.

Consider Your Hair Damage and Previous Treatments

Purple shampoo suits hair that has been lightened, highlighted, or exposed to sun. Purple shampoo might not help if your natural brown hair is healthy and low brass. Sometimes overuse on untreated hair can cause a slight purple cast or dryness.

Think about your hair goals too. Think about keeping your natural shine, adding cool tones, or stopping brassiness.

Use purple shampoo monthly after color or sun damage. It helps control tones.

Choose Purple Shampoo Only If Uplifted/brassy Tones Exist

You only need purple shampoo if yellow tones or brassiness appear in your brown hair. Avoid using it just to “try” without signs of brassiness, as it could dull natural color. Look for subtle signs like a yellow shadow on the scalp or dullness in sunlit hair.

Use purple shampoo once a week for color-treated hair. Use less if brassiness is light.

Watch closely the first few times you use purple shampoo. It can leave violet tint if left too long.

Test purple shampoo on a small hair section before full use to avoid unwanted purple hues.

Step-by-Step Action Plan for Using Purple Shampoo on Brown Hair

Follow these steps to see if purple shampoo improves your brown hair’s tone without unwanted effects.

  1. Before you start: Check if your brown hair is lightened. Purple shampoo works best on lightened or warm highlights.
  2. Week 1: Use purple shampoo once to see if it reduces brassiness. Rinse and evaluate your hair color and texture.
  3. Week 2: Try a second application if hair feels normal and brassiness remains. Avoid overuse; watch for purple residue or dryness.
  4. After 3 weeks: Compare hair color to the start. Use purple shampoo no more than once a week. This helps if brass tones are fewer and your hair stays healthy.
  5. Ongoing: Match your shampoo to your hair’s tone. Use blue shampoo if your brown hair is very dark or cool-toned instead.
  6. When unwanted tones appear: Use a clarifying shampoo to remove purple staining. A gentle conditioner can also help fix it fast.
  7. Every month: Deep condition to keep your hair soft. This balances any dryness from purple shampoo use.

Frequently Asked Questions

Why Do Hairdressers Often Advise Against Purple Shampoo for Brown Hair?

Hairdressers warn against purple shampoo on brown hair because it rarely changes dark brown tones. It works best on lightened or highlighted strands, where it cuts yellow brassy hues. Using it on dark brown hair may waste product and not improve color much.

What Does Purple Shampoo Do to Brunette Hair with Highlights?

Purple shampoo neutralizes yellow and gold tones in lightened brown hair with highlights. It cools down brassiness by roughly 24%, leaving your hair softer and ashier. Using it only on darker natural strands won’t show much effect.

Which Shampoo Color Is Best for Rich Dark Brown Hair Looking Brassy?

Blue shampoo is better for dark brown hair with brassy orange or copper tones. Its blue pigments counteract warm orange hues in medium to dark brunettes. Purple shampoo mainly targets yellow tones, so it suits lighter browns more.

How Can You Tell If Purple Shampoo Will Work on Your Brown Hair?

Purple shampoo works if your brown hair has lighter sections like highlights or balayage. The violet pigment attaches to yellow tones in lightened areas. Your hair is pure dark brown without lightening, you won’t see much change.

Can Purple Shampoo Cause Unwanted Purple Tones on Brown Hair?

Purple shampoo can sometimes leave a slight purple tint if left on too long or overused. This usually happens on light brown or highlighted hair, not on very dark strands. Following instructions carefully helps avoid this issue.

Is Purple Shampoo Safe for Maintaining Cool Tones on Brown Hair?

Purple shampoo is safe when you use it as directed. It helps keep cool tones in light brown hair.

It isn’t harsh but only affects lighter, treated hair sections. Dark brown untreated hair won’t be harmed or colored noticeably by it.

The Bottom Line

Purple shampoo can help manage warm tones in your brown hair if used carefully. Test it slowly and watch how your hair reacts each time. Start with one use and adjust from there to keep your color looking just right.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *